-35%
The 6 3/4″ Single Slot Screwdriver is a precision orthopedic surgical instrument designed for the controlled handling of compatible slotted or single-slot fixation screws. It provides the mechanical interface required to engage a corresponding screw head and allows the surgeon to apply controlled rotational force during implant placement or removal.
With an overall length of 6 3/4 inches, this screwdriver offers an extended working profile compared with shorter hand instruments. The additional length can provide useful access and hand clearance when working around an operative field or within orthopedic instrumentation setups. The actual suitability of the instrument depends on the screw system, slot dimensions, and surgical technique being used.
The single-slot working end is designed to engage screws featuring a compatible straight-slot drive. Correct engagement between the screwdriver tip and screw head is important for maintaining control and minimizing the risk of slipping or damaging the screw interface. Before use, the operator should confirm that the screwdriver dimensions correspond to the intended fixation component.
This instrument may be used as part of orthopedic and trauma instrumentation for procedures involving bone fixation, reconstruction, or implant adjustment. Compatible slotted screws may be encountered in different fixation systems, so this screwdriver should not be considered universally compatible with every slotted screw. Manufacturer specifications or the relevant implant system documentation should be consulted to verify compatibility.
The 6 3/4-inch configuration can also support controlled access in situations where a longer screwdriver is preferred. Proper hand positioning and axial alignment are important when applying rotational force. The screwdriver should be held securely and aligned with the screw axis to promote full engagement of the slot. Excessive force, angled loading, or use with an incompatible screw head can damage either the instrument or fixation component.
For reusable surgical instrumentation, routine inspection is important before and after each use. The screwdriver tip should be checked for wear, deformation, chipping, corrosion, or other damage that could affect screw engagement. A worn or damaged tip may provide inadequate contact with the screw head and should be removed from service according to facility procedures.
After use, the instrument should undergo appropriate cleaning, inspection, and sterilization according to the manufacturer’s validated instructions and the healthcare facility’s instrument-reprocessing protocol. Particular attention should be given to the working end and any areas where surgical debris may accumulate. Proper maintenance helps preserve the functional integrity of the screwdriver and supports reliable performance over its service life.
The exact material, tip dimensions, compatible screw sizes, and sterilization parameters are not specified in the product title and should therefore be confirmed from the manufacturer’s documentation. The 6 3/4″ Single Slot Screwdriver is intended for use by trained healthcare professionals familiar with orthopedic fixation systems and surgical instrument handling.
Key Features
- 6 3/4-inch overall length
- Single-slot screwdriver configuration
- Designed for compatible slotted fixation screws
- Controlled screw insertion and removal
- Suitable for orthopedic and trauma instrumentation
- Extended length for useful surgical access
- Supports controlled rotational force
- Designed for secure slot engagement
- Useful for compatible fracture fixation systems
- Requires screw and tip compatibility verification
- Suitable for integration into orthopedic instrument sets
- Reprocessing should follow manufacturer instructions
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 6 3/4″ Single Slot Screwdriver |
| Instrument Type | Orthopedic Screwdriver |
| Overall Length | 6 3/4 inches |
| Drive Type | Single Slot / Slotted |
| Primary Function | Screw insertion, tightening, loosening, and removal |
| Application | Orthopedic / Trauma Surgery |
| Compatible Component | Slotted fixation screws with matching interface |
| Configuration | Extended surgical hand instrument |
| Tip Dimensions | Refer to manufacturer specification |
| Material | Refer to manufacturer specification |
| Sterilization | Follow validated manufacturer instructions |
| Reusable | Depends on supplied configuration |
| Intended User | Qualified healthcare professionals |
FAQs
1. What is a 6 3/4″ Single Slot Screwdriver used for?
It is designed for controlled insertion, tightening, loosening, and removal of compatible single-slot or slotted orthopedic fixation screws.
2. What does “single slot” mean?
It refers to the straight-slot drive interface at the screwdriver tip, which engages a matching slot in the screw head.
3. Does this screwdriver fit all slotted screws?
No. The screwdriver tip must match the dimensions and configuration of the screw head. Compatibility should be confirmed before use.
4. Why is the screwdriver 6 3/4 inches long?
The extended length can provide additional reach, hand clearance, and handling control compared with shorter screwdriver configurations.
5. Can it be used for orthopedic fracture fixation?
Yes, it may be used with compatible slotted fixation components in orthopedic and trauma procedures, subject to the applicable implant system specifications.
6. How should the screwdriver be used to engage a screw?
The screwdriver should be properly seated in the screw slot and maintained in alignment with the screw axis before controlled rotational force is applied.
7. Is the 6 3/4″ Single Slot Screwdriver reusable?
If supplied as a reusable surgical instrument, it should be cleaned, inspected, and sterilized according to validated manufacturer instructions and facility protocols.