-13%
The TC Pin & Wire Cutter Orthopedic CNS Pliers 7″ is a specialized orthopedic surgical instrument designed for controlled cutting of pins and wires used in fracture fixation and other orthopedic procedures. With a 7-inch overall length, the instrument provides a practical combination of reach, handling, and mechanical leverage for professional surgical applications.
The cutter is designed for use with orthopedic fixation materials such as cerclage wire and Kirschner (K-wire) components, where controlled cutting or trimming is required during or after fixation. Its dedicated cutting mechanism allows the surgeon or trained healthcare professional to trim suitable wire or pin materials according to the requirements of the procedure.
The TC (tungsten carbide) cutting configuration is designed to provide a durable cutting surface and maintain reliable performance when used appropriately. Tungsten carbide inserts or cutting areas are commonly selected for applications requiring a hard, wear-resistant cutting edge.
The 7-inch CNS pliers configuration offers useful hand control and leverage while remaining compact enough for convenient use within an orthopedic operating environment. The instrument can be incorporated into fracture fixation sets, orthopedic trauma trays, and general bone surgery instrument systems.
This pin and wire cutter may be used for trimming protruding wire ends, cutting suitable cerclage wire, and managing Kirschner wires when clinically appropriate. The exact cutting capacity should be matched to the diameter, material, and hardness of the wire or pin and to the instrument’s intended specifications. The cutter should not be used on materials beyond its recommended capacity.
Before use, the cutting edges and jaws should be inspected for alignment, chips, cracks, deformation, or excessive wear. Proper instrument handling is important to preserve the cutting surfaces and maintain safe, predictable operation.
After use, reusable instrumentation should be thoroughly cleaned to remove biological material and surgical debris. Particular attention should be given to the cutting mechanism and joint area. The instrument should then be inspected, dried, and sterilized using validated procedures appropriate for the instrument and healthcare facility.
The TC Pin & Wire Cutter Orthopedic CNS Pliers 7″ is a practical addition to professional orthopedic instrumentation, providing controlled wire and pin cutting for applications involving cerclage wire, Kirschner wires, and orthopedic fixation procedures.
Key Features
- Specialized orthopedic pin and wire cutter
- 7-inch overall length
- TC / tungsten carbide cutting configuration
- Designed for controlled cutting of suitable orthopedic wires
- Suitable for cerclage wire applications
- Suitable for Kirschner (K-wire) applications
- CNS pliers-style orthopedic design
- Provides mechanical leverage for controlled cutting
- Useful for fracture fixation procedures
- Suitable for orthopedic trauma instrument sets
- Durable construction for professional surgical use
- Reusable when properly cleaned and sterilized
Product Specifications
| Specification | Details |
|---|---|
| Product Name | TC Pin & Wire Cutter |
| Instrument Type | Orthopedic Wire & Pin Cutter |
| Length | 7 inches |
| Cutting Surface | TC / Tungsten Carbide |
| Design | CNS Pliers |
| Primary Application | Pin & Wire Cutting |
| Suitable Materials | Appropriate Orthopedic Pins & Wires |
| Wire Applications | Cerclage Wire / Kirschner Wire |
| Specialty | Orthopedic Surgery |
| Reusable | Yes, when designed and processed accordingly |
| Sterilization | Compatible with validated sterilization procedures |
| Intended Use | Professional Surgical Use |
Common Applications
- Cerclage wire cutting
- Kirschner wire cutting
- K-wire trimming
- Orthopedic pin cutting
- Fracture fixation procedures
- Orthopedic trauma surgery
- Bone fixation procedures
- Wire management during orthopedic surgery
Frequently Asked Questions
1. What is a TC pin and wire cutter used for?
It is designed for controlled cutting and trimming of suitable orthopedic pins and wires, including cerclage and Kirschner wires.
2. What does TC mean on this orthopedic cutter?
TC generally refers to tungsten carbide, a hard material commonly used for durable cutting surfaces.
3. What is the length of this pin and wire cutter?
This model has an overall length of 7 inches.
4. Can this cutter be used for Kirschner wires?
Yes. It is designed for appropriate Kirschner wire (K-wire) cutting and trimming applications, subject to the wire diameter and instrument specifications.
5. Is this cutter suitable for cerclage wire?
Yes. The instrument is designed for suitable cerclage wire cutting applications in orthopedic procedures.
6. Can it cut every type and size of orthopedic wire?
No. Cutting capacity depends on the material, diameter, and hardness of the wire or pin. The cutter should only be used within its intended specifications.
7. How should a TC wire cutter be maintained?
The instrument should be thoroughly cleaned, inspected for cutting-edge damage and alignment, dried, and sterilized using validated procedures appropriate for reusable surgical instruments.