-13%
The OR Grade TC CNS Pin & Wire Cutter 7″ Angled is a professional orthopedic surgical instrument designed for cutting pins, wires, and fixation materials during orthopedic procedures. With a 7-inch overall length and angled cutting configuration, this instrument provides a useful combination of reach, control, and access in surgical applications where straight cutters may be less convenient.
The TC (Tungsten Carbide) cutting configuration is designed to provide durable cutting surfaces for repeated professional use when the instrument is used within its intended capacity. The angled working end can help the surgeon or surgical team approach orthopedic wires and pins from a more practical direction, particularly when access around bone, implants, or fixation components is limited.
This CNS-style pin and wire cutter is commonly suited to procedures involving Kirschner wires (K-wires), orthopedic pins, cerclage wire, and other appropriate fixation materials. It may be used during fracture fixation, orthopedic trauma procedures, bone stabilization, and implant-related procedures where excess wire or pin material needs to be trimmed.
The 7-inch size provides a practical working length for controlled handling while maintaining sufficient reach around the operative field. Its ergonomic plier-style construction allows the user to apply controlled hand pressure through the handles, while the angled cutting head supports access to wires positioned at different orientations.
The instrument is intended for professional surgical environments and can be incorporated into orthopedic instrument trays, trauma sets, fracture fixation sets, and general orthopedic surgical kits. Proper instrument selection is important because cutting capacity depends on the diameter, material, hardness, and type of wire or pin being cut. The cutter should not be used beyond its specified cutting capability.
As a reusable surgical instrument, proper care is important for maintaining cutting performance. Following use, remove biological material promptly and clean the instrument according to established surgical instrument reprocessing procedures. Particular attention should be given to the cutting edges, hinge, and joint areas. The instrument should be inspected regularly for edge damage, alignment, corrosion, or restricted movement before use.
The OR Grade TC CNS Pin & Wire Cutter 7″ Angled offers a practical solution for professional orthopedic procedures requiring controlled trimming of suitable pins and wires, combining an angled cutting configuration with a durable TC cutting system.
Key Features
- Professional orthopedic pin and wire cutting instrument
- 7-inch overall length
- Angled cutting head for improved operative access
- TC (Tungsten Carbide) cutting configuration
- Designed for controlled cutting of suitable orthopedic wires and pins
- Suitable for Kirschner wire (K-wire) applications
- Useful for appropriate cerclage and fixation wire
- Plier-style design supports controlled hand operation
- Suitable for orthopedic trauma and fracture fixation procedures
- Reusable when properly processed and maintained
- Designed for professional operating-room use
- Compatible with validated sterilization procedures
Product Specifications
| Specification | Details |
|---|---|
| Product Name | OR Grade TC CNS Pin & Wire Cutter |
| Instrument Type | Pin & Wire Cutter |
| Length | 7 inches |
| Cutting Head | Angled |
| Cutting System | TC / Tungsten Carbide |
| Specialty | Orthopedic Surgery |
| Primary Use | Cutting Suitable Pins & Orthopedic Wire |
| Common Materials Cut | Kirschner Wires, Fixation Wire, Suitable Pins |
| Design | CNS / Plier Style |
| Reusable | Yes, when designed and processed accordingly |
| Sterilization | Validated sterilization procedures |
| Intended Use | Professional Surgical Use |
Surgical Applications
- Orthopedic trauma surgery
- Fracture fixation procedures
- Kirschner wire trimming
- K-wire fixation procedures
- Orthopedic pin cutting
- Cerclage wire management
- Bone stabilization procedures
- Orthopedic implant procedures
- General orthopedic surgery
Frequently Asked Questions
1. What is a TC CNS pin and wire cutter used for?
It is designed for controlled cutting of suitable orthopedic pins, Kirschner wires, and fixation wires during surgical procedures.
2. What does TC mean on this orthopedic cutter?
TC refers to Tungsten Carbide, a hard cutting material commonly incorporated into surgical instrument cutting surfaces for durability.
3. What is the length of this pin and wire cutter?
This model has an overall length of 7 inches.
4. Why does this cutter have an angled head?
The angled configuration can provide improved access and positioning when cutting wires or pins around bone and orthopedic fixation sites.
5. Can it cut Kirschner wires?
Yes, it is designed for appropriate Kirschner wire (K-wire) cutting applications, provided the wire diameter and material are within the cutter’s intended capacity.
6. Is this cutter suitable for orthopedic surgery?
Yes. It is intended for professional orthopedic applications including trauma, fracture fixation, bone stabilization, and related procedures.
7. Can the TC CNS pin cutter be sterilized?
When supplied as a reusable surgical instrument, it can be cleaned and sterilized using appropriate validated procedures according to facility protocols and manufacturer instructions.