-40%
The 7 1/4″ Penetrating Gouge 3mm is a precision orthopedic surgical instrument designed for controlled bone cutting, removal, and shaping. Its 3mm working size provides a focused contact area for localized bone preparation, while the 7 1/4-inch overall length offers a practical balance between reach, maneuverability, and manual control.
The penetrating gouge design allows the working end to engage bone for controlled removal through manually applied pressure. The 3mm size is suited to applications where a relatively narrow working profile is preferred, allowing the surgical professional to work progressively and maintain control over the amount of bone being prepared.
Penetrating gouges may be used in a range of orthopedic and reconstructive procedures where bone surfaces require preparation, contouring, or localized removal. The exact application depends on the surgical technique, anatomy, and preference of the operating professional. This instrument can be incorporated into orthopedic trays and procedure-specific surgical sets where a compact gouge is required.
The 7 1/4-inch length provides additional working reach compared with shorter bone gouges while remaining manageable during manual manipulation. This extended profile can help keep the user’s hand away from the immediate operative area while maintaining tactile feedback through the instrument shaft.
The 3mm working size offers a relatively narrow bone-contact area. This can be beneficial when gradual or localized bone preparation is required rather than engaging a larger surface area at once. The instrument is intended for controlled manual use, allowing the operator to apply appropriate pressure while maintaining accurate positioning.
The penetrating gouge is typically manufactured from surgical-grade stainless steel, providing strength, durability, corrosion resistance, and suitability for professional surgical environments. Its smooth finished surface supports routine cleaning and inspection and helps maintain the instrument’s condition when properly reprocessed.
For reusable instruments, appropriate cleaning and sterilization are essential for maintaining performance and service life. After use, the gouge should be thoroughly cleaned according to the manufacturer’s validated instructions and inspected for damage, deformation, corrosion, or wear. The working edge should receive particular attention before sterilization and subsequent use.
The 7 1/4″ Penetrating Gouge 3mm is a practical addition to orthopedic surgical instrument collections requiring a narrow working size and controlled bone preparation. Its combination of 3mm working dimensions, extended length, and durable construction supports precise handling in appropriate orthopedic procedures.
Key Features
- 7 1/4-inch overall length for practical surgical reach
- 3mm working size for focused bone preparation
- Designed for controlled bone cutting and removal
- Suitable for bone shaping and contouring
- Narrow working profile for localized bone preparation
- Provides direct manual control and tactile feedback
- Useful for orthopedic and reconstructive procedures
- Typically manufactured from surgical-grade stainless steel
- Durable construction for professional surgical use
- Smooth finish supports cleaning and inspection
- Suitable for orthopedic instrument trays and sets
- Reusable when supplied and maintained as a reusable instrument
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 7 1/4″ Penetrating Gouge 3mm |
| Instrument Type | Penetrating Bone Gouge |
| Overall Length | 7 1/4 inches |
| Working Size | 3mm |
| Primary Function | Bone cutting, removal, and shaping |
| Application | Orthopedic and reconstructive surgery |
| Design | Manual surgical instrument |
| Working Profile | Narrow 3mm gouge |
| Material | Typically surgical-grade stainless steel |
| Grip | Manual grip for controlled manipulation |
| Reusable | Yes, when supplied as a reusable instrument |
| Sterilization | Follow manufacturer’s validated instructions |
| Intended Use | Controlled orthopedic bone preparation |
FAQs
What is a 7 1/4″ Penetrating Gouge used for?
It is designed for controlled cutting, removal, shaping, and preparation of bone during appropriate orthopedic surgical procedures.
What does the 3mm size indicate?
The 3mm measurement refers to the specified working size of the gouge and provides a relatively narrow area for focused bone preparation.
Why is this gouge 7 1/4 inches long?
The 7 1/4-inch length provides useful working reach while maintaining maneuverability and tactile control during manual orthopedic procedures.
Can this gouge be used for bone shaping?
Yes. A penetrating gouge may be used for controlled bone removal and shaping when appropriate for the specific surgical technique.
What material is the Penetrating Gouge made from?
It is typically manufactured from surgical-grade stainless steel selected for strength, durability, corrosion resistance, and routine surgical use.
Is this Penetrating Gouge reusable?
If supplied as a reusable instrument, it should be cleaned, inspected, and sterilized according to the manufacturer’s validated instructions and facility protocols.
How should the gouge be maintained?
Clean the instrument after use, inspect the working edge and shaft for damage or deformation, and sterilize it according to validated reprocessing procedures before subsequent use.