-50%
The 11’’ Kirschner Bow Extra Long 5mm Spread is a specialized orthopedic surgical instrument designed for controlled handling and positioning of compatible Kirschner wires (K-wires) during skeletal traction and related orthopedic procedures. Its extra-long 11-inch configuration provides extended working reach, while the 5mm spread identifies the specified separation within the bow configuration for appropriate wire engagement.
Kirschner wires are commonly used in orthopedic surgery for skeletal traction, temporary stabilization, fracture management, and other procedures requiring controlled wire placement. A dedicated Kirschner bow provides a means of positioning and managing the wire while allowing the surgical team to apply or maintain controlled traction according to the selected technique.
The 11-inch extra-long design can be advantageous when additional working clearance or reach is required around the operative field. The longer configuration may help keep the handle or traction components away from the immediate surgical site while maintaining access to the wire. Actual suitability depends on the anatomical location, traction setup, and surgical technique being used.
The 5mm spread is an important dimensional characteristic of this instrument and should be considered when selecting a compatible Kirschner bow. Correct sizing and compatibility between the bow, wire, and traction system are essential for secure handling. The exact wire diameter and traction components supported by this bow should be verified against the applicable manufacturer specifications.
The bow should be positioned and loaded according to the appropriate orthopedic technique. Controlled application of traction is important because excessive or uneven force can affect wire stability and the surrounding tissues. The instrument should not be used beyond its intended mechanical function or with incompatible wires and traction components.
Before use, the Kirschner Bow should be carefully inspected for bending, deformation, corrosion, cracks, damaged contact surfaces, or other defects. Particular attention should be given to the areas responsible for wire engagement and the overall alignment of the bow. A damaged or distorted bow may not provide reliable wire control and should be removed from service.
If supplied as a reusable surgical instrument, it should be thoroughly cleaned, disinfected, sterilized, and stored according to validated manufacturer instructions and the healthcare facility’s approved reprocessing protocol. Proper inspection after cleaning helps ensure that the instrument remains mechanically sound and ready for subsequent use.
The 11″ Extra Long Kirschner Bow with 5mm Spread is a useful component for professional orthopedic and trauma instrument sets where extended reach and controlled Kirschner wire management are required.
Key Features
- 11-inch extra-long configuration
- 5mm specified spread
- Designed for Kirschner wire handling
- Supports skeletal traction procedures
- Controlled wire positioning
- Extended working reach
- Suitable for compatible orthopedic traction systems
- Designed for professional orthopedic use
- Supports controlled traction setup
- Useful for trauma and fracture-management instrumentation
- Verify wire and system compatibility
- Follow manufacturer instructions for reprocessing
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 11″ Extra Long Kirschner Bow |
| Instrument Type | Orthopedic Traction Bow |
| Overall Length | 11 inches |
| Configuration | Extra Long |
| Spread | 5mm |
| Primary Function | Kirschner Wire Handling |
| Application | Skeletal Traction / Orthopedic Procedures |
| Specialty | Orthopedic / Trauma Surgery |
| Wire Compatibility | Verify with manufacturer/system |
| Traction Compatibility | Verify with applicable system |
| Working Mechanism | Controlled Wire Positioning |
| Material | Refer to manufacturer specification |
| Sterilization | Follow validated manufacturer instructions |
| Reusability | Depends on supplied configuration |
| Intended User | Qualified Healthcare Professionals |
FAQs
What is an 11″ Kirschner Bow used for?
It is designed for controlled handling and positioning of compatible Kirschner wires during skeletal traction and selected orthopedic procedures.
What does “extra long” mean?
The extra-long designation refers to the 11-inch overall configuration, providing additional working reach compared with shorter bow designs.
What does the 5mm spread indicate?
The 5mm spread identifies a specified dimensional separation within the bow configuration. Compatibility should be confirmed against the manufacturer’s specifications.
Is this bow suitable for all K-wires?
No. The appropriate wire diameter and traction configuration should be verified before use.
Can it be used for skeletal traction?
It is designed for compatible skeletal traction applications where a Kirschner bow is specified as part of the traction setup.
Why is proper wire tension important?
Controlled tension helps maintain the intended traction setup and wire stability. The appropriate tension should always be determined according to the surgical technique and clinical requirements.
Is the Kirschner Bow reusable?
Reusability depends on the supplied configuration. Reusable versions should undergo validated cleaning, inspection, sterilization, and storage procedures.
