-25%
The 11″ Jet Wire Twister 3/8″ Tips is a specialized orthopedic surgical instrument designed for controlled manipulation, twisting, and handling of compatible surgical wire during orthopedic and trauma procedures. Its extended 11-inch length provides additional reach and leverage, while the 3/8-inch tip configuration is designed to engage compatible wire securely during manual manipulation.
Wire management is an important part of many orthopedic fixation techniques. Depending on the surgical system and procedure, wire may be used for temporary fixation, cerclage, stabilization, or other forms of bone and fragment control. A dedicated wire twister helps the surgeon manipulate the wire in a controlled manner while maintaining appropriate tension and positioning.
The 3/8-inch tips provide a defined working-end dimension for engagement with compatible wire. Proper engagement is important because secure contact helps reduce unwanted wire slippage during twisting. The exact wire diameter and type supported by this instrument should be confirmed with the manufacturer’s specifications and the requirements of the intended fixation system.
The 11-inch overall configuration provides an extended working profile that can be beneficial when additional reach is required around the operative field. The longer design can also provide useful leverage during manual wire manipulation. However, the amount of force applied should always be controlled according to the surgical technique and the characteristics of the wire being used.
The Jet Wire Twister should be used only with compatible surgical wire and according to the applicable orthopedic fixation technique. Excessive twisting can alter the mechanical properties of wire or create undesirable deformation, so controlled manipulation is important. The instrument should not be used as a substitute for system-specific wire tensioning or fixation equipment when such equipment is required.
Before use, inspect the instrument for tip damage, misalignment, deformation, corrosion, surface defects, or other conditions that could affect secure wire engagement. The 3/8-inch tips should be clean and free from debris to support consistent contact with the wire.
If supplied as a reusable surgical instrument, the Jet Wire Twister should be cleaned, disinfected, sterilized, and stored according to validated manufacturer instructions and the healthcare facility’s approved instrument-reprocessing protocol. Particular attention should be given to the working tips and any moving or hinged areas during cleaning and inspection.
The 11″ Jet Wire Twister with 3/8″ Tips is a practical addition to professional orthopedic and trauma instrument sets where controlled wire twisting and manipulation are required. Its extended length, defined tip configuration, and manual handling design support precise wire management during compatible surgical procedures.
Key Features
- 11-inch overall length
- 3/8-inch tip configuration
- Designed for surgical wire manipulation
- Controlled wire twisting and handling
- Extended configuration for additional reach
- Provides useful manual leverage
- Suitable for compatible orthopedic fixation procedures
- Supports cerclage and wire-management techniques
- Designed for secure wire engagement
- Useful for orthopedic and trauma instrument sets
- Professional surgical instrument configuration
- Follow manufacturer instructions for compatible wire and reprocessing
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 11″ Jet Wire Twister 3/8″ Tips |
| Instrument Type | Orthopedic Wire Twister |
| Overall Length | 11 inches |
| Tip Size | 3/8 inch |
| Primary Function | Wire Twisting and Manipulation |
| Application | Compatible Orthopedic Wire Fixation |
| Specialty | Orthopedic / Trauma Surgery |
| Working End | 3/8″ Tips |
| Wire Compatibility | Verify with manufacturer/system |
| Handle Configuration | Wire Twister |
| Material | Refer to manufacturer specification |
| Sterilization | Follow validated manufacturer instructions |
| Reusability | Depends on supplied configuration |
| Intended User | Qualified Healthcare Professionals |
FAQs
What is an 11″ Jet Wire Twister used for?
It is designed for controlled manipulation and twisting of compatible surgical wire during orthopedic and trauma fixation procedures.
What does the 3/8″ tip size mean?
The 3/8-inch specification identifies the stated working-tip dimension of the instrument. Exact wire compatibility should be confirmed with the manufacturer.
Why is the instrument 11 inches long?
The extended 11-inch configuration provides additional working reach and leverage for controlled wire manipulation.
Can it be used with all orthopedic wires?
No. Wire diameter, material, construction, and fixation-system requirements should be checked before selecting the instrument.
Can it be used for cerclage procedures?
It may be used for compatible wire-management and cerclage techniques when specified by the applicable surgical system and technique.
How should the tips be maintained?
The tips should be inspected for deformation, damage, corrosion, and debris before use. Reusable versions should be cleaned and sterilized according to manufacturer instructions.
Is the Jet Wire Twister reusable?
Reusability depends on the supplied instrument configuration. Reusable versions should undergo validated cleaning, sterilization, and inspection procedures.
