-35%
The 2 ¼″ Tap, 2.0 mm, Quick Coupling End is a precision orthopedic instrument designed for preparing internal bone threads during selected fracture fixation and reconstructive procedures. It is intended to work with compatible fixation systems where tapping is specified as part of the surgical technique.
With an overall length of 2 ¼ inches, this tap provides a compact configuration for controlled manual manipulation. The 2.0mm designation identifies the tap size within the applicable orthopedic instrumentation system. The instrument should be matched to the appropriate screw and drill specifications rather than being considered universally compatible with all 2.0mm fixation screws.
The quick coupling end provides an interchangeable connection for a compatible surgical handle. This configuration allows the working tap to be attached to a suitable handle while maintaining a secure connection during manual rotation. Quick coupling interfaces can differ between instrument systems, so the handle and tap should be verified for proper compatibility before use.
During bone preparation, the tap is advanced through an appropriately prepared pilot hole using controlled rotational movement. Its cutting threads form the internal thread profile required for the compatible fixation screw. The appropriate drill diameter, tapping depth, and insertion technique should be determined according to the manufacturer’s instrumentation system and the surgeon’s established surgical technique.
The compact 2 ¼-inch length can be useful where close control and precise manipulation are preferred. It provides a short working profile while retaining the dedicated 2.0mm tapping function. Such compact taps may be incorporated into small-fragment orthopedic instrumentation where appropriately sized fixation components are used.
The 2.0mm designation alone does not establish compatibility with every 2.0mm screw. Thread pitch, geometry, core diameter, and other design characteristics can vary between manufacturers and fixation systems. The tap should therefore be used only with screws and related instruments specifically identified as compatible.
Controlled handling is important during tapping. Excessive force should be avoided, and the tap should be kept properly aligned with the prepared bone hole. Unexpected resistance should not be overcome by forcing the instrument, as improper technique can affect thread preparation and may damage the cutting surface.
Before each procedure, inspect the tap for damaged or worn cutting threads, deformation, corrosion, or other visible defects. The quick coupling end should also be checked to ensure that it engages securely with the intended handle and releases correctly when required.
If supplied as a reusable instrument, the tap should be cleaned, inspected, and sterilized according to validated manufacturer and facility protocols. Particular attention should be given to the cutting flutes and quick coupling interface during cleaning to remove bone debris and maintain reliable performance.
The 2 ¼″ 2.0mm Tap with Quick Coupling End is a practical component for compatible orthopedic fixation systems requiring controlled bone-thread preparation. Its compact size, dedicated 2.0mm configuration, and quick coupling interface support efficient handling during professional orthopedic procedures.
Key Features
- 2 ¼-inch overall length
- 2.0mm tap configuration
- Quick coupling end
- Compact orthopedic instrument design
- Designed for compatible fixation systems
- Supports internal bone thread preparation
- Controlled rotational manipulation
- Suitable for selected fracture fixation procedures
- Useful with compatible small-fragment instrumentation
- Designed for compatible quick-coupling handles
- Secure interchangeable connection
- Reprocessing according to manufacturer instructions
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 2 ¼″ Tap 2.0mm Quick Coupling End |
| Instrument Type | Orthopedic Bone Tap |
| Overall Length | 2 ¼ inches |
| Tap Size | 2.0mm |
| Connection | Quick Coupling End |
| Primary Function | Internal bone thread preparation |
| Application | Compatible orthopedic fixation systems |
| Specialty | Orthopedic / Trauma |
| Compatible Screws | Verify manufacturer specifications |
| Compatible Handle | Matching quick-coupling surgical handle |
| Material | Refer to manufacturer specification |
| Sterilization | Follow validated reprocessing instructions |
| Reusable | Depending on supplied configuration |
| Intended User | Qualified healthcare professionals |
FAQs
1. What is the 2 ¼″ 2.0mm Tap used for?
It is designed to prepare internal bone threads for compatible orthopedic fixation screws when tapping is required by the applicable surgical technique.
2. What does 2.0mm mean on the tap?
The 2.0mm designation identifies the tap size within the compatible fixation system. Exact screw compatibility should be confirmed with manufacturer specifications.
3. What is the purpose of the quick coupling end?
The quick coupling end allows the tap to connect to a compatible surgical handle for controlled manual rotation and efficient instrument changes.
4. Can this tap be used with any 2.0mm screw?
No. Screw thread geometry and pitch can vary between fixation systems. The tap should be matched to the specific compatible screw system.
5. Why is the tap 2 ¼ inches long?
Its compact 2 ¼-inch configuration provides a short working profile that can support controlled handling and precise manipulation.
6. Is this tap suitable for orthopedic fracture fixation?
It may be used with compatible orthopedic fixation systems when thread preparation is specified by the applicable surgical technique.
7. How should this tap be maintained?
If reusable, it should be cleaned, inspected, and sterilized according to the manufacturer’s validated instructions, paying particular attention to the cutting threads and coupling mechanism.
