-46%
The 2 Taps 1.5 mm Quick Coupling End is a compact precision instrument designed for internal bone thread preparation in compatible orthopedic fixation systems. It may be used when a surgical technique requires tapping before insertion of an appropriately matched fixation screw.
With an overall length of 2 inches, this tap provides a short, compact working profile that supports close control during manual manipulation. The 1.5mm designation identifies the tap size within the applicable instrumentation system. Exact screw compatibility should always be confirmed against the relevant manufacturer specifications because thread pitch and geometry can vary between fixation systems.
The quick coupling end is designed to connect with a compatible surgical handle or coupling mechanism. This interchangeable design allows the tap to be attached when needed and replaced with another compatible instrument when required. The coupling interface should be checked carefully before use to ensure that the handle and tap are specifically matched.
During use, the tap is advanced into a properly prepared pilot hole with controlled rotational movement. Its cutting threads prepare the internal bone thread required for the compatible fixation screw. The appropriate pilot-hole diameter, tapping depth, and surgical technique should be determined according to the applicable fixation system and manufacturer instructions.
The compact 2-inch configuration can be advantageous when precise handling and a short working instrument are preferred. It provides direct manual control while maintaining the dedicated 1.5mm tapping function. This type of instrument may be incorporated into small-fragment or specialized orthopedic fixation sets where appropriately sized components are used.
The 1.5mm designation should not be interpreted as universal compatibility with every 1.5mm screw. Different orthopedic systems may use different thread profiles, pitches, and dimensions. Proper matching of the tap, drill, screw, and handle is essential for appropriate instrument performance.
Controlled technique is important during tapping. The instrument should remain aligned with the prepared hole, and excessive force should be avoided. If abnormal resistance is encountered, the procedure should be reassessed rather than forcing the tap through the bone.
Before use, inspect the cutting threads, shaft, and quick coupling end for damage, deformation, corrosion, or excessive wear. The coupling mechanism should securely engage the compatible handle and release correctly when required.
If supplied as a reusable instrument, the tap should be cleaned, inspected, and sterilized according to validated manufacturer and facility protocols. Particular attention should be given to the cutting flutes and coupling area during cleaning to remove bone debris and maintain proper function.
The 2″ 1.5mm Tap with Quick Coupling End is a practical component for compatible orthopedic instrumentation systems requiring precise bone-thread preparation. Its compact length, 1.5mm configuration, and quick coupling interface support efficient handling during professional orthopedic procedures.
Key Features
- 2-inch overall length
- 1.5mm tap configuration
- Quick coupling end
- Compact orthopedic instrument design
- Designed for compatible fixation systems
- Supports internal bone thread preparation
- Controlled rotational manipulation
- Suitable for selected small-fragment procedures
- Compatible with matching quick-coupling handles
- Supports efficient instrument changes
- Compact profile for precise handling
- Reprocessing according to manufacturer instructions
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 2″ Tap 1.5mm Quick Coupling End |
| Instrument Type | Orthopedic Bone Tap |
| Overall Length | 2 inches |
| Tap Size | 1.5mm |
| Connection | Quick Coupling End |
| Primary Function | Internal bone thread preparation |
| Application | Compatible orthopedic fixation systems |
| Specialty | Orthopedic / Trauma |
| Compatible Screws | Verify manufacturer specifications |
| Compatible Handle | Matching quick-coupling surgical handle |
| Material | Refer to manufacturer specification |
| Sterilization | Follow validated reprocessing instructions |
| Reusable | Depending on supplied configuration |
| Intended User | Qualified healthcare professionals |
FAQs
1. What is the 2″ 1.5mm Tap used for?
It is designed to prepare internal bone threads for compatible fixation screws when tapping is required by the applicable orthopedic surgical technique.
2. What does 1.5mm indicate?
The 1.5mm designation identifies the tap size within the applicable fixation system. It does not by itself guarantee compatibility with every 1.5mm screw.
3. What is the purpose of the quick coupling end?
It allows the tap to connect to a compatible quick-coupling surgical handle for controlled manual operation.
4. Can this tap be used with any 1.5mm orthopedic screw?
No. The tap should be matched to the specific compatible screw system because thread pitch and geometry may differ.
5. What is the advantage of the 2-inch length?
The short configuration provides a compact working profile and can support controlled handling where close manual manipulation is preferred.
6. Is this tap suitable for small-fragment fixation?
It may be incorporated into compatible small-fragment fixation systems when the corresponding 1.5mm tap, screw, and instrumentation are specified by the manufacturer.
7. How should the tap be maintained?
If reusable, it should be cleaned, inspected, and sterilized according to validated manufacturer instructions, with particular attention to the cutting threads and quick coupling mechanism.
