-48%
The 7″ Small Locking Plier Regular Jaw is a compact locking hand instrument designed for controlled gripping, holding, positioning, and manipulation of compatible components and materials. Its 7-inch length provides a practical balance between reach, handling, and leverage, while the regular jaw configuration offers a general-purpose gripping surface for selected surgical and orthopedic instrument applications.
The locking mechanism is the defining feature of this plier. Once properly engaged, it helps maintain the grip on the selected component without requiring continuous squeezing of the handles. This can be useful during procedures or instrument preparation tasks where stable retention and controlled manipulation are required. The locking action should be used appropriately and adjusted to the component being held to avoid unnecessary pressure or deformation.
The regular jaw design provides a straightforward gripping profile suitable for a variety of compatible applications. Depending on the specific instrument system and intended use, the plier may be used for handling wires, small components, fixation-related materials, or other items requiring temporary secure retention. It should not be used for cutting unless the instrument is specifically manufactured with a designated cutting function.
With an overall length of 7 inches, this small locking plier is suited to applications where controlled access and manageable instrument size are important. The relatively compact design allows the user to position the jaws accurately while maintaining a stable hand grip. Its locking action can also help support repetitive handling tasks by reducing the amount of continuous manual force required.
The 7″ Small Locking Plier Regular Jaw can be incorporated into orthopedic, trauma, surgical, and general instrument sets where a locking gripping instrument is appropriate. Exact clinical applications should be determined by the jaw configuration, material being handled, and the technique specified by the healthcare professional or instrument manufacturer.
For proper performance, inspect the jaws, pivot, locking mechanism, and handle alignment before use. The jaws should close evenly and the locking mechanism should engage and release smoothly. Avoid excessive force or using the plier beyond its intended function, as improper use may damage the instrument or the material being handled.
Material specifications, reusable status, surface finish, and sterilization requirements are configuration-dependent and should be confirmed with the manufacturer or supplier. If supplied as a reusable surgical instrument, it should be cleaned, inspected, lubricated where appropriate, packaged, and sterilized according to validated facility procedures and the manufacturer’s reprocessing instructions.
Key Features:
- 7-inch overall instrument length
- Small locking plier configuration
- Regular jaw design for general-purpose gripping
- Locking mechanism for secure component retention
- Helps reduce continuous hand pressure during holding
- Suitable for controlled gripping and positioning
- Useful for selected orthopedic and surgical workflows
- Compact design supports controlled instrument handling
- Appropriate for compatible wires and small components
- Smooth locking and release should be checked before use
- Not intended for cutting unless specifically designated
- Reprocessing should follow validated manufacturer instructions
Product Specifications:
| Specification | Details |
|---|---|
| Product Name | 7″ Small Locking Plier Regular Jaw |
| Instrument Type | Locking Plier |
| Overall Length | 7 inches |
| Jaw Type | Regular Jaw |
| Locking Mechanism | Yes |
| Design | Small / Compact |
| Primary Function | Gripping, holding, positioning and manipulation |
| Application | Surgical, orthopedic and instrument-handling workflows |
| Cutting Function | Not specified |
| Material | Not specified; confirm manufacturer specification |
| Sterilization | Follow manufacturer and facility-approved protocol |
FAQs:
1. What is a 7″ Small Locking Plier used for?
It is designed for controlled gripping, holding, positioning, and manipulation of compatible surgical components, wires, and materials.
2. What does the locking mechanism do?
The locking mechanism helps maintain the grip after the jaws are engaged, reducing the need for continuous manual pressure.
3. What is the advantage of the regular jaw design?
The regular jaw provides a general-purpose gripping profile for compatible components and materials where secure retention is required.
4. Is this plier suitable for orthopedic applications?
It may be used in selected orthopedic and trauma workflows for gripping or positioning compatible components, depending on the manufacturer’s intended application.
5. Is the 7″ Small Locking Plier a cutting instrument?
No cutting function is specified for this model. It should not be used for cutting unless the instrument is specifically designed and labeled for that purpose.
6. How should the locking plier be maintained?
Inspect the jaws, pivot, locking mechanism, and handles regularly. Cleaning, lubrication, sterilization, and other reprocessing steps should follow the manufacturer’s validated instructions.
7. Is the instrument reusable?
Reusability depends on the specific product configuration and manufacturer instructions. Confirm the intended use and reprocessing requirements before clinical use.
