-21%
The 11 1/2″ Bent Needle Nose Locking Plier is a long-reach gripping instrument designed for controlled holding, positioning, and manipulation of compatible surgical and orthopedic components. With an overall length of 11 1/2 inches, it provides additional reach compared with shorter locking pliers, while the bent needle-nose configuration helps the user approach components from an angled position.
The needle-nose working profile is suited to applications requiring access around or between components where a conventional straight jaw may provide less convenient positioning. The bent configuration can assist with controlled access and visibility during selected instrument-handling, orthopedic, trauma, and surgical workflows. Exact clinical applications depend on the working-end dimensions and the manufacturer’s intended use.
A built-in locking mechanism allows the jaws to maintain their grip after engagement. This can reduce the need for continuous hand pressure while a compatible component is being held or positioned. The locking action should be adjusted appropriately for the material being handled to maintain secure retention without applying excessive force.
The extended 11 1/2-inch length offers useful reach for tasks where the working area is relatively deep or access is limited. The needle-nose profile provides a narrow gripping area that can be useful for manipulating small components, wires, pins, or other compatible materials. This instrument should only be used for applications appropriate to its jaw design and should not be treated as a cutting tool unless a dedicated cutting function is specified.
The bent needle-nose design combines reach, angled access, and controlled gripping in one instrument. It may be incorporated into orthopedic, trauma, surgical, and general instrument sets where a locking long-reach plier is required. Proper technique should always follow the procedure, instrument system, and manufacturer recommendations.
Before use, inspect the jaws for alignment and condition and verify that the locking mechanism engages and releases smoothly. Check the pivot and handles for proper movement. Excessive force, inappropriate loading, or using the instrument as a lever beyond its intended purpose may damage the jaws or locking mechanism.
Material, finish, reusable status, and sterilization requirements are configuration-dependent and should be confirmed from the manufacturer’s specifications. If the instrument is supplied as reusable, cleaning, inspection, lubrication where applicable, packaging, and sterilization should be performed according to validated facility procedures and the manufacturer’s reprocessing instructions.
Key Features:
- 11 1/2-inch overall length
- Long-reach locking plier design
- Bent needle-nose working profile
- Locking mechanism for secure gripping
- Narrow jaws for controlled access
- Extended reach for selected surgical applications
- Suitable for gripping and positioning compatible components
- Useful for selected orthopedic and trauma workflows
- Supports manipulation of compatible wires and small components
- Angled profile facilitates controlled approach
- Not intended for cutting unless specifically designated
- Reprocessing should follow manufacturer instructions
Product Specifications:
| Specification | Details |
|---|---|
| Product Name | 11 1/2″ Bent Needle Nose Locking Plier |
| Instrument Type | Locking Plier |
| Overall Length | 11 1/2 inches |
| Jaw Style | Needle Nose |
| Jaw Configuration | Bent |
| Locking Mechanism | Yes |
| Primary Function | Gripping, holding, positioning and manipulation |
| Reach | Extended |
| Applications | Surgical, orthopedic and trauma workflows |
| Cutting Function | Not specified |
| Material | Not specified; confirm manufacturer specification |
| Sterilization | Follow validated manufacturer/facility protocol |
FAQs:
1. What is an 11 1/2″ Bent Needle Nose Locking Plier used for?
It is designed for controlled gripping, holding, positioning, and manipulation of compatible surgical components, wires, pins, and materials.
2. What is the benefit of the bent needle-nose design?
The bent profile provides an angled approach that can assist with access to components in areas where a straight plier may be less convenient.
3. Why is the plier 11 1/2 inches long?
The extended length provides additional reach and leverage for selected applications where a longer instrument is useful.
4. How does the locking mechanism work?
The locking mechanism allows the jaws to remain engaged around a compatible component, reducing the need for continuous manual pressure.
5. Can this plier be used for orthopedic procedures?
It may be suitable for selected orthopedic and trauma workflows involving controlled manipulation of compatible wires, pins, or components, subject to the manufacturer’s intended use.
6. Is this a cutting plier?
No cutting function is specified. It should not be used for cutting unless the instrument is specifically designed and identified for that purpose.
7. How should this locking plier be sterilized?
Cleaning and sterilization should follow the manufacturer’s validated reprocessing instructions and the healthcare facility’s approved sterilization protocol.