-35%
The Pick 1mm Angled 25° Medium Shaft 6 3/8″ is a precision surgical instrument designed for controlled manipulation and accurate access during delicate ENT and otologic procedures. Its fine 1mm working tip provides a narrow contact point, while the 25° angled configuration allows the instrument to approach the operative area from a slightly offset direction.
The angled working end can be useful when direct access with a straight instrument is difficult. A 25° angle provides a moderate change in direction while retaining precise control of the tip. This configuration can assist with positioning, tissue manipulation, separation, or other delicate surgical tasks according to the specific procedure and surgical technique.
The 1mm tip offers a fine working profile for situations where precision is important. It allows the surgeon to work around small anatomical structures while maintaining controlled contact. The medium shaft provides a practical balance between rigidity and maneuverability, helping the user maintain stable instrument control during fine movements.
With an overall length of 6 3/8 inches, the pick provides useful reach for specialized operative fields without making the instrument unnecessarily difficult to handle. The combination of shaft length and angled tip can help improve access to areas where working space is limited. The exact clinical application should always be determined according to the instrument design, surgical technique, and manufacturer’s intended use.
This pick may be incorporated into specialized ENT and otologic surgical instrument sets. Its fine tip and controlled angulation make it suitable for procedures requiring careful manipulation of small structures. It should be selected based on the requirements of the procedure and the specific working characteristics needed by the surgeon.
When supplied as a reusable instrument, it is typically manufactured from surgical-grade stainless steel to provide strength, durability, and resistance to corrosion during repeated professional use. A smooth finish supports routine cleaning, inspection, and instrument processing.
The 1mm working tip should be protected from excessive force and improper handling. Before use, inspect the tip and shaft for bending, deformation, corrosion, surface damage, or other defects. Maintaining the original 25° geometry is important for consistent instrument performance and accurate positioning.
Following use, clean and process the instrument according to the manufacturer’s validated instructions and the healthcare facility’s sterilization protocol. Particular attention should be given to the fine angled tip during cleaning to ensure that tissue residue and other contaminants are removed before sterilization.
The Pick 1mm Angled 25° Medium Shaft 6 3/8″ provides a combination of fine tip precision, moderate angulation, practical shaft length, and controlled handling. It is a valuable choice for professional ENT and otologic instrument sets requiring accurate access and delicate surgical manipulation.
Key Features
- Precision surgical pick for delicate procedures
- Fine 1mm working tip
- 25° angled tip configuration
- Medium shaft design
- 6 3/8-inch overall length
- Supports precise tissue manipulation
- Angled tip improves access to offset working areas
- Suitable for specialized ENT applications
- Useful for delicate otologic procedures
- Medium shaft provides a balance of reach and control
- Typically manufactured from surgical-grade stainless steel when reusable
- Smooth finish supports cleaning and inspection
Product Specifications
| Specification | Details |
|---|---|
| Product Name | Pick 1mm Angled 25° Medium Shaft 6 3/8″ |
| Instrument Type | Surgical Pick |
| Tip Size | 1mm |
| Tip Angle | 25° |
| Shaft | Medium |
| Overall Length | 6 3/8 inches |
| Primary Function | Controlled manipulation and access |
| Specialty | ENT / Otology |
| Working Configuration | Angled |
| Material | Surgical-grade stainless steel, when applicable |
| Finish | Smooth surgical finish |
| Reusable | Yes, when supplied as reusable |
| Sterilization | Follow manufacturer and facility protocol |
FAQs
What is the Pick 1mm Angled 25° used for?
It is designed for precise manipulation, positioning, and controlled access during delicate ENT and otologic surgical procedures.
What is the tip size?
The pick has a fine 1mm working tip for focused surgical manipulation.
What does the 25° angle provide?
The 25° angle allows the working tip to approach the target area from a slightly offset direction, which can assist when direct access is limited.
What type of shaft does this pick have?
This model features a medium shaft, providing a balance between reach, rigidity, and maneuverability.
What is the overall length?
The overall length is 6 3/8 inches.
Is this instrument suitable for otologic procedures?
Yes. It is designed for specialized ENT and otologic applications requiring controlled access and precise manipulation.
What material is the pick made from?
Reusable versions are typically manufactured from surgical-grade stainless steel for durability and corrosion resistance.
Can the instrument be sterilized?
If supplied as a reusable instrument, it should be cleaned and sterilized according to the manufacturer’s validated instructions and the healthcare facility’s approved sterilization protocol.
