-27%
The Double Drill Sleeve 2.7 2.0mm Bits is a precision orthopedic instrument designed to provide controlled guidance during bone drilling procedures. Its double configuration accommodates compatible 2.7mm and 2.0mm drill bits, making it a practical component for orthopedic trauma, fracture fixation, and reconstructive instrument sets.
Accurate drill-bit positioning is important during orthopedic fixation because the prepared bone hole must follow the intended trajectory for the selected fixation component. A drill sleeve provides a defined guiding pathway around the drill bit, helping maintain alignment and supporting controlled advancement during bone preparation.
This instrument is designed around two drill-bit sizes: 2.7mm and 2.0mm. The dual-size arrangement allows the appropriate guiding interface to be selected according to the surgical technique and compatible fixation system. Combining two guiding options into one instrument can also make an orthopedic instrument set more efficient by reducing the need for separate single-size sleeves.
The 2.7mm and 2.0mm dimensions refer to the intended drill-bit sizes. They should not be interpreted as universal compatibility with every drill bit of those diameters. Drill guide geometry, internal dimensions, working length, and fixation-system compatibility can vary between manufacturers. The instrument should therefore be matched with the applicable surgical system and manufacturer documentation before use.
The Double Drill Sleeve may be used during fracture fixation and other orthopedic procedures requiring controlled preparation of bone for compatible screws or fixation components. It can be particularly useful in small-fragment and precision fixation systems where consistent drill alignment is important.
During a procedure, the appropriate end or guiding interface is positioned according to the surgical technique. The compatible drill bit is then introduced through the sleeve and advanced while maintaining the required trajectory. Proper seating and alignment should be confirmed before drilling. The surgeon should follow the recommended technique for the relevant fixation system, including drilling depth, screw selection, and implant placement.
A drill sleeve supports instrument control but does not replace anatomical judgment or the manufacturer’s surgical technique. Correct drill-bit selection and compatibility are essential for safe and effective use.
Before and after each procedure, the instrument should be inspected for deformation, corrosion, wear, blockage, or damage to either guiding pathway. The channels should remain clear so compatible drill bits can pass smoothly. Any instrument that may compromise drill alignment should be evaluated and removed from service when necessary.
If supplied as a reusable surgical instrument, cleaning, inspection, and sterilization should be performed according to the manufacturer’s validated reprocessing instructions and applicable healthcare-facility protocols. Particular attention should be given to both guide channels to ensure removal of surgical debris.
The Double Drill Sleeve for 2.7mm and 2.0mm Bits provides a practical dual-size solution for controlled drill guidance. Its two compatible guiding interfaces make it a useful addition to orthopedic fixation instrumentation where accurate bone preparation and consistent drill alignment are required.
Key Features
- Double drill sleeve configuration
- Designed for compatible 2.7mm drill bits
- Designed for compatible 2.0mm drill bits
- Supports controlled drill-bit alignment
- Helps maintain the intended drilling trajectory
- Suitable for orthopedic fixation procedures
- Useful for fracture and trauma instrumentation
- Supports accurate bone preparation
- Dual-size functionality in one instrument
- Suitable for compatible small-fragment systems
- Compact and practical instrument-set design
- Reprocessing should follow manufacturer instructions
Product Specifications
| Specification | Details |
|---|---|
| Product Name | Double Drill Sleeve 2.7 & 2.0mm Bits |
| Instrument Type | Orthopedic Double Drill Sleeve |
| Configuration | Dual-size drill guide |
| Drill Bit Size 1 | 2.7mm |
| Drill Bit Size 2 | 2.0mm |
| Primary Function | Drill-bit guidance and alignment |
| Application | Bone preparation for orthopedic fixation |
| Surgical Specialty | Orthopedic / Trauma |
| Compatible Systems | Verify manufacturer specifications |
| Overall Length | Refer to manufacturer specification |
| Material | Refer to manufacturer specification |
| Sterilization | Follow validated manufacturer reprocessing instructions |
| Reusable | Depending on supplied configuration |
| Intended User | Qualified healthcare professionals |
FAQs
1. What is the Double Drill Sleeve for 2.7mm and 2.0mm Bits used for?
It is designed to guide compatible 2.7mm and 2.0mm drill bits during controlled bone preparation for orthopedic fixation.
2. What drill-bit sizes does this sleeve accommodate?
The instrument is designed for compatible 2.7mm and 2.0mm drill bits.
3. What is the advantage of a dual-size drill sleeve?
It combines two drill-guiding functions in one instrument, providing convenient access to two compatible drill sizes within an orthopedic procedure.
4. Can this sleeve be used with any 2.7mm or 2.0mm drill bit?
No. Compatibility depends on the guide dimensions and the corresponding fixation system. Manufacturer specifications should be verified before use.
5. Is this drill sleeve suitable for fracture fixation?
It may be used during fracture fixation and other orthopedic procedures when specified for the compatible instrumentation and implant system.
6. Does the sleeve determine drilling depth?
Not necessarily. Drilling depth should be determined according to the surgical technique, anatomy, compatible fixation system, and manufacturer instructions.
7. How should the Double Drill Sleeve be maintained?
If supplied as reusable, it should be cleaned, inspected, and sterilized according to the manufacturer’s validated reprocessing instructions, with both guide channels checked for debris or damage.