-40%
The 7″ Maxillary Awl is a specialized maxillofacial surgical instrument designed for controlled bone marking, perforation, and preparation of the maxilla. Its pointed working end allows the surgeon to establish a precise starting point on bone when required during maxillary surgery, fracture management, reconstructive procedures, and other oral and maxillofacial applications.
The 7-inch overall length provides a useful combination of reach and control for procedures involving the upper jaw. The elongated design can help the surgeon access areas of the maxilla that may be difficult to approach with a shorter instrument while maintaining a stable grip and controlled application of force. The pointed awl tip concentrates pressure at a small contact area, supporting precise engagement with the bone.
Maxillary awls can be used during selected surgical techniques where controlled bone perforation or marking is required before subsequent instrumentation. In maxillofacial trauma and fixation procedures, an awl may assist with establishing or identifying a precise location for subsequent drilling, fixation, or implant-related steps, depending on the surgeon’s preferred technique and the requirements of the procedure.
The instrument is also suitable for use in oral and maxillofacial surgical sets where dependable manual bone preparation is required. Its straightforward construction provides direct tactile feedback, allowing the surgeon to control the direction and amount of pressure applied to the working end. This can be particularly useful when precise positioning is more important than rapid bone removal.
The 7″ Maxillary Awl is typically manufactured from surgical-grade stainless steel, providing the strength and durability expected from a reusable surgical instrument. Stainless steel construction also offers good resistance to corrosion when appropriate cleaning, drying, handling, and sterilization procedures are followed. The working tip should be inspected routinely to ensure it remains properly formed and free from damage.
The 7-inch design makes this instrument practical for maxillary procedures where additional working reach is beneficial. Its balanced construction supports controlled manipulation while allowing the surgeon to position the pointed end accurately against the maxillary bone.
As a reusable surgical instrument, proper instrument care is essential. After use, the maxillary awl should be cleaned according to established instrument-processing procedures, thoroughly inspected, and sterilized using the healthcare facility’s validated protocol and applicable manufacturer instructions.
The 7″ Maxillary Awl is a practical addition to oral, maxillofacial, craniofacial, and reconstructive surgical instrument sets where controlled maxillary bone marking and perforation are required.
Key Features
- Specialized awl for maxillary bone procedures
- 7-inch overall length
- Pointed working end for controlled bone engagement
- Designed for bone marking and perforation
- Useful in oral and maxillofacial surgery
- Provides extended working reach
- Supports precise manual positioning
- Suitable for selected maxillary fixation procedures
- Typically manufactured from surgical-grade stainless steel
- Durable reusable construction
- Designed for controlled surgical handling
- Compatible with validated cleaning and sterilization procedures
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 7″ Maxillary Awl |
| Instrument Type | Maxillary Awl |
| Overall Length | 7 inches |
| Working End | Pointed Awl Tip |
| Specialty | Oral & Maxillofacial Surgery |
| Primary Application | Maxillary Bone Preparation |
| Typical Uses | Bone Marking and Controlled Perforation |
| Material | Surgical-Grade Stainless Steel |
| Reusable | Yes |
| Sterilization | Compatible with validated sterilization protocols |
FAQs
1. What is a maxillary awl used for?
A maxillary awl is used for controlled marking, perforation, and preparation of maxillary bone during selected oral and maxillofacial procedures.
2. What is the length of this maxillary awl?
The instrument has an overall length of 7 inches.
3. Can this awl be used during maxillary fixation procedures?
It may be used for selected bone-marking or preparation steps during maxillary fixation, depending on the surgeon’s technique and the fixation system being used.
4. What is the purpose of the pointed tip?
The pointed tip concentrates pressure on a small area, allowing controlled engagement with bone for marking or initiating a perforation.
5. What material is the 7″ Maxillary Awl made from?
This type of reusable surgical awl is typically manufactured from surgical-grade stainless steel for strength, durability, and corrosion resistance.
6. Is the maxillary awl reusable?
Yes. It is designed for reusable professional surgical applications when properly cleaned, inspected, maintained, and sterilized.
7. Which specialties use a maxillary awl?
It is primarily intended for oral and maxillofacial surgery, with potential applications in maxillary trauma, fixation, reconstruction, and craniofacial procedures.
