-27%
The 5 3/4” Kirschner Bow Medium is a specialized orthopedic surgical instrument designed for controlled handling and positioning of compatible Kirschner wires (K-wires) during skeletal traction and selected orthopedic trauma procedures. Its medium configuration provides a practical balance between working clearance, wire engagement, and manual handling in procedures where a smaller or medium-sized traction bow is appropriate.
Kirschner wires are commonly used in orthopedic surgery for skeletal traction, temporary stabilization, fracture management, and controlled positioning of bone or fracture fragments. A dedicated Kirschner bow provides a secure framework for managing the wire while allowing the surgical team to establish the desired traction arrangement according to the selected surgical technique.
The 5 3/4-inch measurement identifies the specified size of this bow and places it within a medium configuration. Choosing the appropriate bow size can help provide suitable clearance and wire positioning for the anatomical site and traction setup. The exact suitability of this instrument depends on the wire diameter, anatomical location, traction method, and compatible accessories used during the procedure.
The bow should be used with compatible Kirschner wire and traction components. Because the product title does not specify a particular wire diameter or spread, these details should be verified against the manufacturer’s specifications before use. Correct compatibility is important for secure wire engagement and reliable handling during the procedure.
During skeletal traction, controlled force and appropriate alignment are essential. The Kirschner Bow should be positioned according to the established surgical technique, with traction applied in a controlled manner. Excessive or uneven force should be avoided because it may affect wire stability or surrounding tissue.
Before use, the instrument should be inspected for bending, deformation, cracks, corrosion, surface damage, or other defects. Particular attention should be given to the areas responsible for wire engagement and the overall alignment of the bow. A damaged or distorted instrument should not be used.
If supplied as a reusable surgical instrument, the 5 3/4″ Medium Kirschner Bow should be cleaned, disinfected, sterilized, and stored according to validated manufacturer instructions and the healthcare facility’s approved reprocessing protocol. Inspection after cleaning helps confirm that the instrument remains mechanically sound and suitable for subsequent use.
This instrument is intended for qualified healthcare professionals familiar with orthopedic traction techniques. It should be used only with compatible wires and traction equipment and according to the applicable surgical system and manufacturer’s instructions.
The 5 3/4″ Medium Kirschner Bow is a practical addition to orthopedic and trauma instrument sets where a medium-sized bow is required for controlled Kirschner wire positioning and compatible skeletal traction procedures.
Key Features
- 5 3/4-inch overall configuration
- Medium-size Kirschner bow
- Designed for Kirschner wire handling
- Supports skeletal traction procedures
- Controlled wire positioning
- Balanced working profile
- Suitable for compatible orthopedic traction systems
- Useful for orthopedic trauma procedures
- Designed for controlled traction setup
- Professional orthopedic surgical instrument
- Verify wire and system compatibility
- Follow manufacturer instructions for reprocessing
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 5 3/4″ Medium Kirschner Bow |
| Instrument Type | Orthopedic Traction Bow |
| Size | 5 3/4 inches |
| Configuration | Medium |
| Primary Function | Kirschner Wire Handling |
| Application | Skeletal Traction / Orthopedic Procedures |
| Specialty | Orthopedic / Trauma Surgery |
| Wire Compatibility | Verify with manufacturer/system |
| Traction Compatibility | Verify with applicable system |
| Working Mechanism | Controlled Wire Positioning |
| Material | Refer to manufacturer specification |
| Sterilization | Follow validated manufacturer instructions |
| Reusability | Depends on supplied configuration |
| Intended User | Qualified Healthcare Professionals |
FAQs
What is the 5 3/4″ Medium Kirschner Bow used for?
It is designed for controlled handling and positioning of compatible Kirschner wires during skeletal traction and selected orthopedic procedures.
What does “Medium” mean on this Kirschner Bow?
The Medium designation identifies the bow’s size configuration, with a specified dimension of 5 3/4 inches.
What does the 5 3/4-inch measurement indicate?
It identifies the stated size of the Kirschner Bow and should not be interpreted as the diameter or length of the Kirschner wire.
Can this bow be used with all K-wires?
No. The appropriate wire diameter and compatibility with the bow’s engagement mechanism should be confirmed before use.
Is this bow suitable for skeletal traction?
It is designed for compatible skeletal traction applications where a Kirschner bow is specified as part of the traction setup.
Why is selecting the correct bow size important?
The appropriate size can provide suitable working clearance and wire positioning for the anatomical site and traction configuration.
Is the Kirschner Bow reusable?
Reusability depends on the supplied configuration. Reusable versions should be cleaned, inspected, sterilized, and maintained according to validated manufacturer instructions.
