-35%
The 127mm Drill Bit Jacob Chuck End 5.0mm Flute Length 57mm is a precision orthopedic surgical drill bit designed for controlled bone drilling and preparation during compatible orthopedic, trauma, and reconstructive procedures. With an overall length of 127mm, a 5.0mm drilling diameter, and a 57mm flute length, this drill bit provides defined dimensional characteristics for surgical systems requiring this specific configuration.
The 5.0mm diameter provides a consistent drilling size for applications where a 5.0mm drill is specified by the applicable orthopedic fixation or surgical technique. Proper drill selection is important because the prepared bone opening must correspond to the requirements of the compatible fixation components, implant system, or surgical procedure. This instrument should therefore be used according to the relevant surgical technique and manufacturer specifications.
A key feature of this drill bit is its Jacobs chuck end. This connection is designed for use with compatible Jacobs-style surgical drill chucks, allowing the bit to be securely mounted to appropriate drilling equipment. Correct chuck engagement is important for maintaining stable rotation and controlled drilling. Compatibility should always be confirmed because shaft and chuck configurations can differ between surgical systems.
The 57mm flute length provides the designated cutting length for bone drilling while allowing efficient removal of bone material from the working area. The flute configuration should be kept clear of accumulated debris during use to support consistent cutting performance. Drilling technique, rotational speed, pressure, irrigation where applicable, and depth control should follow the requirements of the procedure and compatible equipment.
The 127mm overall length provides an extended instrument profile that may be useful where additional working reach is required. The actual suitability of the length depends on the surgical approach, drilling equipment, and anatomical location involved. It should not be assumed to be universally appropriate for every orthopedic procedure.
Before use, the drill bit should be carefully inspected for cutting-edge wear, bending, deformation, corrosion, surface damage, or other defects. The Jacobs chuck end should also be examined to ensure that it is clean and able to engage securely with the intended drill chuck. A damaged or excessively worn drill bit should be removed from service according to facility procedures.
If supplied as a reusable instrument, the 127mm 5.0mm Drill Bit should be cleaned, inspected, sterilized, and stored according to validated manufacturer instructions and healthcare facility reprocessing protocols. Proper maintenance helps preserve the cutting surfaces, flute area, and chuck connection for reliable performance.
The 127mm Drill Bit with Jacobs Chuck End, 5.0mm Flute Diameter and 57mm Flute Length is suitable for professional orthopedic instrumentation sets where these specific dimensions and a Jacobs chuck connection are required.
Key Features
- 127mm overall length
- 5.0mm drill diameter
- 57mm flute length
- Jacobs chuck end
- Designed for controlled orthopedic bone drilling
- Supports accurate bone preparation
- Suitable for compatible fixation procedures
- Extended 127mm working configuration
- Designed for compatible Jacobs-style drill chucks
- Defined flute length for controlled cutting
- Suitable for orthopedic and trauma instrumentation
- Follow manufacturer specifications for use and reprocessing
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 127mm Drill Bit with Jacobs Chuck End |
| Instrument Type | Orthopedic Surgical Drill Bit |
| Overall Length | 127mm |
| Drill Diameter | 5.0mm |
| Flute Length | 57mm |
| Chuck Connection | Jacobs Chuck End |
| Primary Function | Bone Drilling and Preparation |
| Application | Orthopedic Fixation / Bone Preparation |
| Specialty | Orthopedic / Trauma Surgery |
| Compatible Equipment | Compatible Jacobs-style drill chuck |
| Drill Guide Compatibility | Verify with manufacturer/system |
| Shaft Configuration | Jacobs chuck compatible |
| Material | Refer to manufacturer specification |
| Sterilization | Follow validated manufacturer instructions |
| Reusability | Depends on supplied configuration |
| Intended User | Qualified Healthcare Professionals |
FAQs
What is the 127mm Drill Bit used for?
It is designed for controlled bone drilling and preparation during compatible orthopedic, trauma, and reconstructive procedures where a 5.0mm drill is specified.
What does the 5.0mm diameter indicate?
The 5.0mm designation refers to the nominal drilling diameter of the bit and should be selected according to the requirements of the applicable surgical or fixation system.
What does the 57mm flute length mean?
The 57mm flute length refers to the designated fluted cutting portion of the drill bit. It defines the available fluted working section rather than the overall instrument length.
What is the purpose of the Jacobs chuck end?
The Jacobs chuck end is designed to secure the drill bit in a compatible Jacobs-style surgical drill chuck, allowing controlled rotational drilling.
Is this drill bit compatible with every Jacobs chuck?
Not necessarily. Compatibility depends on the chuck and shaft specifications. The drill bit should be used only with a compatible surgical drill chuck.
Why is the overall length 127mm?
The 127mm overall length provides an extended drill-bit configuration that may offer additional working reach depending on the surgical approach and equipment being used.
How should this drill bit be maintained?
If reusable, it should be thoroughly cleaned, inspected, sterilized, and stored according to validated manufacturer instructions and the healthcare facility’s instrument-reprocessing protocol.