-25%
The 11 3/4’’ French Rod Bender (For Rods up to 7mm) is a specialized orthopedic and spinal surgical instrument designed for controlled bending and contouring of compatible fixation rods up to 7mm in diameter. Rod contouring is an important step in spinal instrumentation when a fixation rod needs to be adapted to the desired anatomical alignment or the configuration of a compatible spinal fixation system.
With an overall length of 11 3/4 inches, this French-style rod bender provides a longer working configuration that can offer useful leverage and controlled handling during rod manipulation. The instrument is designed to engage the rod securely while allowing the surgical team to make gradual adjustments to its contour. Controlled bending can help achieve the intended rod geometry while minimizing unnecessary deformation.
The instrument may be used in spinal fixation procedures involving compatible rod-based stabilization systems. Depending on the specific fixation system and surgical technique, rod contouring can be performed to accommodate spinal anatomy and support appropriate positioning of the rod within the implant construct. The 7mm maximum rod diameter specification should be observed carefully, and the instrument should not be assumed to be compatible with rods exceeding the stated capacity.
French rod benders are particularly useful when controlled leverage is required during preparation of spinal rods. The extended 11 3/4-inch configuration can provide a practical balance between reach, handling, and force application. This makes the instrument suitable for inclusion in orthopedic trauma and spinal surgery instrument sets where rod preparation is required.
Rod bending should always be performed according to the recommendations of the applicable implant manufacturer. Different spinal rods can vary in diameter, material, mechanical properties, and allowable bending technique. Excessive force, bending beyond the recommended limits, or repeated bending and straightening may compromise the mechanical characteristics of certain rods. The surgical team should therefore verify rod compatibility and approved bending techniques before use.
The 11 3/4″ French Rod Bender is intended for professional surgical use and should be handled by appropriately trained personnel familiar with spinal fixation systems. Before each procedure, the instrument should be inspected for deformation, cracks, corrosion, worn working surfaces, or other signs of damage that could affect performance. The rod-engaging surfaces should remain properly aligned and free from contamination.
If supplied as a reusable surgical instrument, appropriate cleaning, inspection, lubrication where applicable, packaging, and sterilization should be performed according to the manufacturer’s validated reprocessing instructions and facility protocols. Material composition, exact rod compatibility, maximum bending force, and reusable status should be confirmed from the manufacturer’s documentation.
Key Features
- 11 3/4-inch overall length
- French-style spinal rod bender
- Designed for rods up to 7mm diameter
- Controlled rod bending and contouring
- Extended configuration for useful leverage
- Supports spinal fixation procedures
- Helps adapt compatible rods to required contours
- Suitable for spinal instrumentation sets
- Designed for gradual, controlled manipulation
- Rod compatibility should be verified before use
- Professional orthopedic surgical instrument
- Reprocessing should follow manufacturer instructions
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 11 3/4″ French Rod Bender |
| Instrument Type | Spinal Rod Bender |
| Overall Length | 11 3/4 inches |
| Maximum Rod Diameter | Up to 7mm |
| Configuration | French Rod Bender |
| Primary Function | Rod bending and contouring |
| Application | Spinal fixation and instrumentation |
| Specialty | Spine Surgery / Orthopedics |
| Rod Compatibility | Rods up to 7mm, subject to system specifications |
| Material | Refer to manufacturer specification |
| Sterilization | Follow validated manufacturer instructions |
| Reusable | Depending on supplied configuration |
| Intended User | Qualified surgical professionals |
FAQs
1. What is the 11 3/4″ French Rod Bender used for?
It is used to bend and contour compatible spinal fixation rods during spinal instrumentation and stabilization procedures.
2. What is the maximum rod size for this bender?
This model is specified for rods up to 7mm in diameter. Compatibility should still be confirmed with the specific spinal fixation system.
3. Why is the instrument 11 3/4 inches long?
The extended length provides useful leverage and handling control when bending and contouring spinal rods.
4. Can it be used with rods larger than 7mm?
It should not be assumed to be suitable for rods larger than 7mm. The manufacturer’s stated capacity and compatibility specifications should always be followed.
5. Why are spinal rods contoured during surgery?
Rod contouring allows compatible fixation rods to be shaped according to the required spinal anatomy and implant construct before or during placement.
6. Can a spinal rod be bent repeatedly?
Repeated bending or straightening can affect the mechanical properties of some rods. The implant manufacturer’s approved bending technique and limitations should be followed.
7. Is the French Rod Bender reusable?
If supplied as a reusable instrument, it should be cleaned, inspected, and sterilized according to the manufacturer’s validated reprocessing instructions.