-35%
The 7″ Parkes Hump Gouge Double Guarded 6mm Wide is a specialized surgical instrument designed for controlled bone removal, shaping, and contouring. Its 6mm-wide working end provides a focused area for bone manipulation, while the double-guarded design helps provide controlled handling during procedures requiring careful instrument positioning.
Parkes hump gouges are associated with surgical applications involving bone contouring and removal, particularly where controlled preparation of a defined anatomical area is required. The gouge design allows the operator to apply measured manual force to the working end for gradual bone removal. Exact use depends on the surgical procedure, anatomical location, and surgeon’s preferred technique.
The double-guarded configuration provides additional structure around the working area and can help guide the instrument during use. This design may also help protect the surrounding areas of the instrument from unintended contact while supporting controlled manipulation. Proper technique and appropriate instrument selection remain essential for safe surgical use.
With an overall length of 7 inches, this instrument offers a practical balance between reach and control. The length allows the user to maintain a secure grip while positioning the 6mm working end at the intended surgical site. The 6mm width provides a moderately focused working surface suitable for controlled removal and refinement without the broad profile of larger gouges.
The working end is designed for bone preparation rather than soft-tissue manipulation. It may be used to remove or shape bone where a gouge-style instrument is appropriate. Controlled pressure and deliberate movements allow the surgeon to refine the bone surface according to the requirements of the procedure.
The instrument is typically manufactured from surgical-grade stainless steel, providing strength, durability, and resistance to corrosion when properly cleaned and maintained. Its rigid construction supports controlled force application and reliable handling in professional surgical environments.
After use, the Parkes Hump Gouge should be thoroughly cleaned to remove bone particles, tissue, and other biological contaminants. Particular attention should be given to the working end and guarded areas where debris may accumulate. The instrument should also be inspected for wear, deformation, corrosion, or other damage before reuse.
When supplied as a reusable instrument, sterilization should be performed according to the manufacturer’s validated instructions and the healthcare facility’s established sterilization protocol. Proper cleaning, drying, sterilization, and storage help maintain instrument performance and service life.
The 7 Inch Parkes Hump Gouge Double Guarded 6mm Wide combines a practical 7-inch length, 6mm working width, and double-guarded construction for controlled surgical bone manipulation. It is a useful addition to professional surgical and orthopedic instrument sets where precise bone shaping and removal are required.
Key Features
- 7-inch overall length
- 6mm working width
- Parkes hump gouge design
- Double-guarded configuration
- Designed for controlled bone removal
- Suitable for bone shaping and contouring
- Focused working profile for localized procedures
- Supports precise manual manipulation
- Provides practical reach and handling
- Typically manufactured from surgical-grade stainless steel
- Durable construction for professional surgical use
- Reusable when supplied as a reusable instrument
Product Specifications
| Specification | Details |
|---|---|
| Product Name | Parkes Hump Gouge Double Guarded |
| Overall Length | 7 inches |
| Working Width | 6mm |
| Design | Hump Gouge |
| Guard Configuration | Double Guarded |
| Primary Function | Bone removal, shaping, and contouring |
| Working Profile | 6mm |
| Operation | Manual |
| Material | Surgical-grade stainless steel, typically |
| Common Applications | Surgical and orthopedic procedures |
| Reusable | Yes, when supplied as reusable |
| Sterilization | According to manufacturer instructions and facility protocol |
| Intended Use | Professional medical use |
FAQs
What is the 7 Inch Parkes Hump Gouge used for?
It is designed for controlled bone removal, shaping, contouring, and refinement during appropriate surgical procedures.
What is the working width of this gouge?
The Parkes Hump Gouge has a 6mm-wide working end.
What does double guarded mean?
The double-guarded design provides additional structure around the instrument’s working area to support controlled handling and positioning.
What is the overall length of this Parkes Gouge?
The overall length is 7 inches.
Is this gouge suitable for orthopedic procedures?
It may be used for appropriate orthopedic and other surgical applications involving controlled bone manipulation, depending on the procedure and surgical technique.
What material is the instrument typically made from?
It is typically manufactured from surgical-grade stainless steel for strength, durability, and corrosion resistance.
How should the Parkes Hump Gouge be cleaned?
It should be thoroughly cleaned after use to remove bone particles and biological material, with particular attention to the working and guarded areas.
Can this gouge be sterilized?
When supplied as a reusable instrument, it should be sterilized according to the manufacturer’s validated instructions and the healthcare facility’s approved sterilization protocol.
