-46%
The Flap Knife Dissector Double End, 7 1/4″ is a specialized surgical instrument designed for controlled tissue dissection and manipulation of surgical flaps. With a total length of 7 1/4 inches, the instrument provides practical reach and handling for professional surgical applications. Its double-ended design combines two working ends in a single instrument, allowing the user to select the appropriate end according to the surgical task and required tissue access.
The instrument is designed for procedures where careful separation, elevation, or manipulation of tissue may be required. A dedicated flap dissector can provide controlled contact with tissue while helping the surgeon maintain a consistent working angle. The double-ended configuration can also reduce the need to exchange instruments during a procedure when both working profiles are appropriate for the surgical technique.
At 7 1/4 inches in length, this flap knife dissector offers a balance between working reach and maneuverability. The length can be useful when access to the operative site requires additional reach while still allowing controlled manipulation by the surgeon. The exact function of each end should be determined according to the instrument’s intended design and the specific surgical procedure.
Reusable versions of this type of surgical instrument are typically manufactured from surgical-grade stainless steel or another suitable medical-instrument material. A rigid construction supports controlled handling, while a smooth professional finish facilitates routine cleaning and inspection. The working ends should be protected from impact and improper handling to help maintain their intended shape and performance.
The Flap Knife Dissector should be cleaned promptly following use according to the healthcare facility’s established instrument-reprocessing protocol. Particular attention should be given to both working ends and any areas where tissue or surgical debris may remain. If supplied as a reusable instrument, sterilization should be performed according to the manufacturer’s validated instructions and the facility’s approved sterilization procedure.
Before each use, the instrument should be inspected for visible damage, corrosion, deformation, or other irregularities. Proper handling and storage are especially important for precision surgical instruments because damage to either working end may affect usability. Instruments should only be used when they are in suitable condition and appropriate for the intended procedure.
The Flap Knife Dissector Double End, 7 1/4″ is a practical addition to professional surgical instrument collections requiring a versatile double-ended tool for controlled tissue dissection and flap manipulation. Its combination of two working ends and a 7 1/4-inch overall length makes it suitable for appropriate surgical settings, including hospitals, surgical centers, and specialized instrument sets.
Key Features
- Double-ended surgical flap dissector design
- Overall length of 7 1/4 inches
- Designed for controlled tissue dissection
- Suitable for flap manipulation and tissue handling
- Two working ends provide functional versatility
- Supports precise surgical instrument control
- Practical length for professional surgical applications
- Typically manufactured from surgical-grade stainless steel
- Rigid construction supports controlled handling
- Smooth finish facilitates cleaning and inspection
- Suitable for professional surgical instrument sets
- Reprocessing should follow validated manufacturer instructions
Product Specifications
| Specification | Details |
|---|---|
| Product Name | Flap Knife Dissector |
| Instrument Type | Surgical Dissector |
| Configuration | Double End |
| Length | 7 1/4 inches |
| Primary Function | Tissue dissection and flap manipulation |
| Working Ends | Two |
| Specialty | Surgical / Procedure Dependent |
| Material | Typically surgical-grade stainless steel |
| Finish | Professional surgical instrument finish |
| Reusable | Depending on supplied configuration |
| Sterilization | Follow validated manufacturer instructions |
| Use Environment | Hospitals, clinics, surgical centers |
FAQs
1. What is a Flap Knife Dissector used for?
It is designed for controlled tissue dissection, flap manipulation, and delicate tissue handling during appropriate surgical procedures.
2. What does double-ended mean?
Double-ended means the instrument has two working ends, allowing the user to select the appropriate end according to the surgical task.
3. What is the length of this Flap Knife Dissector?
The instrument has an overall length of 7 1/4 inches.
4. Is this instrument suitable for professional surgery?
Yes. It is designed for professional surgical environments and should be used by appropriately trained healthcare professionals for suitable procedures.
5. What material is the Flap Knife Dissector made from?
Reusable versions are typically manufactured from surgical-grade stainless steel or another suitable medical-instrument material.
6. Can this instrument be sterilized?
If supplied as a reusable instrument, it should be cleaned and sterilized according to the manufacturer’s validated instructions and the healthcare facility’s approved reprocessing protocol.
7. How should the double-ended instrument be maintained?
Both working ends should be carefully cleaned and inspected after use. The instrument should be checked for damage, corrosion, or deformation before subsequent use.
