-27%
The Chisel 6 1/4″ Straight 1mm Tip is a precision surgical instrument designed for controlled preparation and manipulation during delicate surgical procedures. Its narrow 1mm working tip provides a focused contact area, making it suitable for applications where accurate positioning and controlled instrument movement are important.
With an overall length of 6 1/4 inches, the instrument provides a practical balance between working access and surgeon control. The straight configuration allows the working end to be positioned directly toward the intended area, supporting precise movements during surgical preparation. The 1mm tip is particularly useful where a narrow working profile is required.
This type of surgical chisel can be used in specialized ENT and otologic procedures as well as other applications where a fine, straight-ended instrument is appropriate. The exact clinical application depends on the chisel design, tip geometry, and surgical technique. It should therefore be selected according to the intended procedure and the manufacturer’s specifications.
The slim working end helps provide controlled contact with the target area while the 6 1/4-inch shaft offers sufficient reach for access to smaller or deeper operative sites. The straight design can also make the instrument easier to align with the intended direction of work, helping support consistent handling during delicate procedures.
When supplied as a reusable instrument, it is typically manufactured from surgical-grade stainless steel selected for mechanical strength, corrosion resistance, and compatibility with repeated instrument processing. A smooth surgical finish helps facilitate cleaning and inspection while maintaining a professional appearance.
Proper handling is important for preserving the 1mm tip. The working end should be inspected before and after use for bending, chipping, deformation, corrosion, or other damage that could affect performance. Avoid using excessive force or applying the instrument outside its intended purpose, as precision tips can be affected by improper handling.
After use, the Chisel should be cleaned and processed according to the manufacturer’s validated instructions and the healthcare facility’s sterilization protocol. Reusable versions should be thoroughly cleaned before sterilization, with particular attention given to the narrow working tip and any areas where debris may collect.
The Chisel 6 1/4″ Straight 1mm Tip is a useful precision instrument for surgical professionals who require a narrow, straight working end and controlled handling. Its combination of a fine 1mm tip, 6 1/4-inch length, and straight configuration makes it suitable for specialized surgical instrument sets where precision and accessibility are important.
Key Features
- Precision surgical chisel with straight working configuration
- Fine 1mm tip for focused surgical work
- 6 1/4-inch overall length
- Designed for controlled cutting and preparation
- Straight tip supports direct instrument alignment
- Suitable for delicate surgical manipulation
- Useful for specialized ENT and otologic applications
- Narrow working profile for precision access
- Typically manufactured from surgical-grade stainless steel when reusable
- Smooth finish supports cleaning and inspection
- Designed for professional surgical environments
- Reusable when supplied as a reusable surgical instrument
Product Specifications
| Specification | Details |
|---|---|
| Product Name | Chisel 6 1/4″ Straight 1mm Tip |
| Instrument Type | Surgical Chisel |
| Overall Length | 6 1/4 inches |
| Tip Size | 1mm |
| Tip Configuration | Straight |
| Primary Function | Controlled cutting, preparation and manipulation |
| Specialty | Surgical / ENT / Otology |
| Working End | Fine straight 1mm tip |
| Material | Surgical-grade stainless steel, when applicable |
| Finish | Smooth surgical finish |
| Reusable | Yes, when supplied as reusable |
| Sterilization | Follow manufacturer and facility protocol |
FAQs
What is the Chisel 6 1/4″ Straight 1mm Tip used for?
It is designed for controlled surgical preparation, cutting, and manipulation where a narrow 1mm working tip is required.
What is the tip size of this surgical chisel?
The working tip is 1mm wide, providing a fine contact area for precision procedures.
Is the chisel straight?
Yes. This model has a straight working configuration for direct positioning and controlled instrument movement.
What is the overall length?
The overall length is 6 1/4 inches, providing a useful combination of access and handling control.
Is this chisel suitable for ENT procedures?
It may be suitable for specialized ENT and otologic applications depending on the specific surgical technique and intended use.
What material is the chisel made from?
Reusable versions are typically manufactured from surgical-grade stainless steel for durability and resistance to corrosion.
Can this surgical chisel be sterilized?
If supplied as a reusable instrument, it should be cleaned and sterilized according to the manufacturer’s validated instructions and the healthcare facility’s approved processing protocol.
