-35%
The 4″ Taps 2.7mm Quick Coupling End is designed for controlled preparation of internal bone threads during orthopedic fixation procedures. Tapping may be required in selected fixation techniques to create an appropriate threaded pathway for compatible screws before final insertion.
With an overall length of 4 inches, this tap provides a compact working configuration suitable for controlled manual manipulation. The 2.7mm designation identifies the intended tap size within the applicable orthopedic fixation system. It should be used only with screw systems and instrumentation specifically identified as compatible by the manufacturer.
The quick coupling end allows the tap to connect with a compatible surgical handle or coupling mechanism. This interchangeable configuration can help streamline instrument changes during surgery and allows the same handle to be used with different compatible working attachments. Because coupling designs can vary between manufacturers, the connection should always be checked before clinical use.
During bone preparation, the tap is advanced through the prepared hole using controlled rotational movement. The cutting threads form the internal thread profile required for the compatible fixation screw. Appropriate drilling diameter, tapping depth, and technique should be determined according to the applicable implant system and surgical technique.
The 2.7mm size is commonly associated with small-fragment orthopedic fixation systems, but the designation alone should not be treated as universal compatibility. Screw pitch, thread geometry, core diameter, and other design characteristics may vary. The tap should therefore be matched to the specific screw and instrumentation system rather than selected solely by nominal diameter.
The 4-inch configuration provides convenient handling where a shorter working instrument is preferred. Its compact length can assist with controlled positioning and rotational manipulation while maintaining direct tactile feedback. The instrument may be included in orthopedic trauma and fracture fixation sets where compatible threaded fixation screws are used.
Careful technique is important when using any bone tap. Excessive force or improper alignment may affect thread preparation and instrument performance. The tap should be advanced according to the recommended surgical technique and should not be forced if resistance is unexpectedly high.
Before use, inspect the cutting threads, shaft, and quick coupling interface for visible damage, deformation, corrosion, or other defects. The coupling mechanism should securely retain the handle or attachment and release correctly when required.
If supplied as a reusable instrument, the tap should be thoroughly cleaned, inspected, and sterilized according to validated manufacturer and facility protocols. The cutting flutes and coupling area should receive particular attention during cleaning because bone debris can interfere with proper performance.
The 4″ 2.7mm Tap with Quick Coupling End is a practical component for compatible orthopedic instrumentation systems requiring controlled bone-thread preparation. Its compact length, dedicated 2.7mm configuration, and quick coupling interface support efficient instrument handling during professional orthopedic procedures.
Key Features
- 4-inch overall length
- 2.7mm tap configuration
- Quick coupling end
- Designed for compatible orthopedic fixation systems
- Supports internal bone thread preparation
- Controlled rotational manipulation
- Compact working configuration
- Suitable for selected fracture fixation procedures
- Useful with compatible small-fragment instrumentation
- Designed for use with compatible surgical handles
- Secure quick-coupling connection
- Reprocessing according to manufacturer instructions
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 4″ Tap 2.7mm Quick Coupling End |
| Instrument Type | Orthopedic Bone Tap |
| Overall Length | 4 inches |
| Tap Size | 2.7mm |
| Connection | Quick Coupling End |
| Primary Function | Internal bone thread preparation |
| Application | Compatible orthopedic fixation systems |
| Specialty | Orthopedic / Trauma |
| Compatible Screws | Verify manufacturer specifications |
| Compatible Handle | Matching quick-coupling surgical handle |
| Material | Refer to manufacturer specification |
| Sterilization | Follow validated reprocessing instructions |
| Reusable | Depending on supplied configuration |
| Intended User | Qualified healthcare professionals |
FAQs
1. What is the 4″ 2.7mm Tap used for?
It is designed to prepare internal bone threads for compatible orthopedic fixation screws when tapping is required by the surgical technique.
2. What does 2.7mm indicate?
The 2.7mm designation identifies the tap size within the applicable fixation system. Exact screw compatibility should be confirmed with manufacturer documentation.
3. What is the purpose of the quick coupling end?
It allows the tap to connect with a compatible quick-coupling surgical handle for controlled manual operation and efficient instrument changes.
4. Can this tap be used with any 2.7mm screw?
No. Screw thread geometry and pitch can vary between systems. The tap should be matched to the specific compatible screw system.
5. Why is the tap only 4 inches long?
The 4-inch configuration provides a compact working profile that can support controlled handling and positioning during orthopedic procedures.
6. Is this tap suitable for fracture fixation?
It may be used in compatible orthopedic fracture fixation systems when internal thread preparation is specified by the applicable surgical technique.
7. How should the tap be maintained?
If reusable, it should be cleaned, inspected, and sterilized according to the manufacturer’s validated instructions, with particular attention to the cutting threads and quick coupling interface.