-35%
The 9″ Drill Bit Three Fluted 3.2mm Calibrated is a precision orthopedic drilling instrument designed for controlled bone preparation during compatible fracture fixation, trauma, and reconstructive procedures. It features a 3.2mm nominal drilling diameter, three-fluted cutting configuration, calibrated depth markings, and an extended 9-inch overall length for applications requiring additional working reach.
The 3.2mm diameter provides a defined drilling size for compatible orthopedic fixation systems. Drill-bit selection should always correspond to the specific implant, screw, drill guide, and surgical technique being used. A 3.2mm diameter should not be interpreted as universal compatibility with every fixation component of the same nominal size.
Its three-fluted cutting configuration provides multiple cutting edges and channels intended to support controlled removal of bone material during drilling. The fluted geometry can help facilitate evacuation of drilling debris while maintaining a defined drilling path. Proper alignment, controlled pressure, and appropriate drilling technique remain essential for consistent bone preparation.
The 9-inch length provides extended reach compared with shorter drill bits. This configuration may be useful when drilling through deeper operative approaches or compatible guides and instrumentation that require additional working length. The extended shaft should be handled carefully to maintain the intended trajectory and avoid unnecessary lateral loading.
Calibrated markings provide visual depth references during drilling. These markings can assist the surgical team in assessing drilling depth when preparing bone for compatible fixation components. Final drilling depth should be determined according to the implant system, anatomical requirements, and established surgical technique rather than relying solely on the markings.
The drill bit can be incorporated into compatible orthopedic trauma and fracture fixation instrument sets. When used with a drill guide or sleeve, the guide should be selected specifically for the drill-bit diameter and applicable fixation system. The shaft and drive connection must also match the intended surgical drill or compatible handpiece.
Controlled drilling technique is important to protect the bone and maintain the intended preparation. The user should follow the applicable manufacturer’s instructions for drilling speed, pressure, irrigation or cooling, guide use, and depth limitations. The drill bit should not be forced through bone or used outside its intended configuration.
Before each procedure, inspect the three flutes, cutting edges, shaft, calibrated markings, and connection area for wear, deformation, corrosion, or other damage. Any instrument showing compromised cutting performance or structural integrity should be evaluated according to facility protocols.
If supplied as a reusable surgical instrument, the drill bit should be thoroughly cleaned, inspected, and sterilized according to validated manufacturer instructions. Particular attention should be given to the fluted cutting surfaces and connection areas where bone debris can accumulate.
The 9″ 3.2mm Calibrated Three-Fluted Drill Bit combines an extended 9-inch working length, 3.2mm drilling diameter, three-fluted cutting design, and calibrated depth references. It is suited for professional orthopedic applications where controlled drilling and accurate bone preparation are required.
Key Features
- 9-inch overall length
- 3.2mm nominal drilling diameter
- Three-fluted cutting configuration
- Calibrated depth markings
- Designed for controlled bone drilling
- Extended working length for deeper access
- Supports drilling depth assessment
- Suitable for compatible orthopedic fixation systems
- Useful for fracture fixation and bone preparation
- Compatible drive connection should be verified
- Supports controlled drilling alignment
- Reprocessing according to manufacturer instructions
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 9″ Drill Bit Three Fluted 3.2mm Calibrated |
| Instrument Type | Orthopedic Drill Bit |
| Overall Length | 9 inches |
| Diameter | 3.2mm |
| Flute Design | Three Fluted |
| Configuration | Calibrated |
| Primary Function | Bone drilling and preparation |
| Application | Compatible orthopedic fixation systems |
| Specialty | Orthopedic / Trauma |
| Depth Reference | Calibrated markings |
| Drive Compatibility | Verify manufacturer specifications |
| Drill Guide Compatibility | Verify applicable instrumentation system |
| Material | Refer to manufacturer specification |
| Sterilization | Follow validated reprocessing instructions |
| Reusable | Depending on supplied configuration |
| Intended User | Qualified healthcare professionals |
FAQs
1. What is the 9″ 3.2mm Drill Bit used for?
It is designed for controlled bone drilling and preparation during compatible orthopedic fixation and reconstructive procedures.
2. What does 3.2mm indicate?
The 3.2mm measurement identifies the nominal drilling diameter of the drill bit.
3. What is the purpose of the three flutes?
The three flutes provide multiple cutting edges and channels that support controlled bone cutting and removal of drilling debris.
4. What does calibrated mean on this drill bit?
Calibrated markings provide depth references that can help assess drilling depth during bone preparation.
5. Why is the drill bit 9 inches long?
The extended 9-inch configuration provides additional working reach for surgical applications requiring a longer drill bit.
6. Can it be used with any 3.2mm orthopedic fixation system?
No. Compatibility depends on the implant system, drill guide, shaft connection, and surgical technique. Manufacturer specifications should be confirmed before use.
7. How should this drill bit be maintained?
If reusable, it should be cleaned, inspected, and sterilized according to validated manufacturer instructions, with particular attention to the cutting flutes and connection area.
