-27%
The 9″ Drill Bit Three Fluted 2.5mm Calibrated is a precision orthopedic drilling instrument designed for controlled bone preparation during compatible fracture fixation, trauma, and reconstructive procedures. It features a 2.5mm nominal drilling diameter, three-fluted cutting configuration, calibrated depth markings, and an extended 9-inch overall length for applications requiring additional working reach.
The 2.5mm drilling diameter provides a defined cutting size for compatible orthopedic instrumentation and fixation systems. Drill-bit selection should always correspond to the specific screw, implant, drill guide, and surgical technique being used. The 2.5mm measurement does not by itself establish compatibility with every fixation component having a similar nominal dimension.
The three-fluted configuration provides multiple cutting edges and channels designed to support controlled removal of bone material during drilling. The flutes can assist with the movement of drilling debris away from the cutting area while maintaining a defined drilling path. Proper alignment and controlled drilling technique remain essential for consistent bone preparation.
With an overall length of 9 inches, this drill bit provides an extended working profile compared with shorter orthopedic drill bits. The additional length may be useful for deeper surgical approaches or compatible instrumentation that requires increased reach. The extended configuration should be handled carefully to maintain the intended drilling trajectory and avoid excessive lateral loading.
The calibrated markings provide visual references for assessing drilling depth during bone preparation. These markings can assist with controlled drilling when preparing bone for compatible fixation components. Actual drilling depth should be determined according to the relevant implant system, anatomical requirements, drill-guide configuration, and established surgical technique.
This drill bit may be used as part of compatible orthopedic trauma and fracture fixation instrument sets. Where a drill guide or sleeve is specified, the appropriate guide should be selected for the 2.5mm bit and the applicable fixation system. The drill-bit shaft and drive connection must also match the intended surgical drill or handpiece.
Controlled drilling technique is important for maintaining accurate preparation. The user should follow the applicable manufacturer’s instructions regarding drilling speed, applied pressure, irrigation or cooling, guide use, and depth limitations. The bit should not be forced through bone or used outside its intended configuration.
Before use, inspect the cutting edges, three flutes, shaft, calibrated markings, and connection area for wear, deformation, corrosion, or other damage. Worn or damaged cutting surfaces may affect drilling performance and should be evaluated according to facility procedures.
If supplied as a reusable instrument, the drill bit should be thoroughly cleaned, inspected, and sterilized according to validated manufacturer instructions. Special attention should be given to the fluted cutting surfaces and connection area because bone debris may collect in these areas during use.
The 9″ 2.5mm Calibrated Three-Fluted Drill Bit combines an extended 9-inch working length, 2.5mm drilling diameter, three-fluted cutting design, and calibrated depth references. It provides a practical solution for professional orthopedic applications requiring controlled drilling and accurate bone preparation.
Key Features
- 9-inch overall length
- 2.5mm nominal drilling diameter
- Three-fluted cutting configuration
- Calibrated depth markings
- Designed for controlled orthopedic bone drilling
- Extended working length for deeper access
- Supports drilling depth assessment
- Suitable for compatible fixation systems
- Useful for fracture fixation and bone preparation
- Controlled cutting and debris evacuation
- Compatible drive connection should be verified
- Reprocessing according to manufacturer instructions
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 9″ Drill Bit Three Fluted 2.5mm Calibrated |
| Instrument Type | Orthopedic Drill Bit |
| Overall Length | 9 inches |
| Diameter | 2.5mm |
| Flute Design | Three Fluted |
| Configuration | Calibrated |
| Primary Function | Bone drilling and preparation |
| Application | Compatible orthopedic fixation systems |
| Specialty | Orthopedic / Trauma |
| Depth Reference | Calibrated markings |
| Drive Compatibility | Verify manufacturer specifications |
| Drill Guide Compatibility | Verify applicable instrumentation system |
| Material | Refer to manufacturer specification |
| Sterilization | Follow validated reprocessing instructions |
| Reusable | Depending on supplied configuration |
| Intended User | Qualified healthcare professionals |
FAQs
1. What is the 9″ 2.5mm Drill Bit used for?
It is designed for controlled bone drilling and preparation during compatible orthopedic fixation and reconstructive procedures.
2. What does 2.5mm indicate?
The 2.5mm measurement identifies the nominal drilling diameter of the drill bit.
3. What is the purpose of the three-fluted design?
The three flutes provide multiple cutting edges and channels that support controlled bone cutting and removal of drilling debris.
4. What does calibrated mean on this drill bit?
Calibrated markings provide visual depth references that can assist in assessing drilling depth during bone preparation.
5. Why is this drill bit 9 inches long?
The 9-inch length provides additional working reach for surgical applications requiring an extended drill configuration.
6. Can this drill bit be used with any 2.5mm fixation system?
No. Compatibility depends on the fixation system, drill guide, shaft connection, and surgical technique. Manufacturer specifications should be confirmed before use.
7. How should the drill bit be maintained?
If reusable, it should be cleaned, inspected, and sterilized according to validated manufacturer instructions, with particular attention to the flutes, cutting edges, and connection area.
