-27%
The Drill Bit 3.5mm Jacobs Drill Chuck (Duplicate) is a precision orthopedic drilling instrument designed for controlled bone preparation during compatible fracture fixation, trauma, and reconstructive procedures. It features a 3.5mm nominal drilling diameter and is intended for use with a compatible Jacobs-style drill chuck.
The 3.5mm diameter provides a defined cutting size for selected orthopedic bone preparation applications. Drill-bit selection should always be based on the requirements of the applicable fixation system, screw dimensions, drill guide, and surgical technique. The 3.5mm diameter alone does not establish compatibility with every orthopedic implant or fixation component.
The Jacobs drill chuck configuration allows the drill bit to be securely mounted to compatible surgical drilling equipment. Proper chuck engagement is important for maintaining controlled rotation and reducing the possibility of bit movement during operation. Before use, the operator should verify that the drill-bit shaft is compatible with the specific Jacobs chuck and that the bit is securely tightened.
This drill bit may be incorporated into orthopedic trauma and fracture fixation instrument sets where controlled bone drilling is required. Depending on the applicable system, it can support preparation of bone for compatible fixation screws and other orthopedic components. Its defined diameter makes it suitable for applications where a 3.5mm drilling size is specified by the surgical technique or implant manufacturer.
Accurate drilling alignment is essential during orthopedic procedures. A compatible drill guide or sleeve may be used where required to maintain the intended trajectory. The surgical team should follow the applicable manufacturer’s recommendations regarding drilling speed, applied pressure, irrigation or cooling, drilling depth, and instrument positioning.
Controlled pressure should be maintained throughout drilling rather than forcing the instrument through bone. Appropriate technique helps maintain the intended drilling path and reduces unnecessary stress on the cutting edges and shaft. The drill bit should only be used within its intended application and compatible equipment configuration.
Before each procedure, inspect the drill bit for worn or damaged cutting edges, bending, deformation, corrosion, or other visible defects. The shaft and chuck engagement area should also be examined for damage that could interfere with secure mounting.
If supplied as a reusable instrument, the drill bit should be cleaned, inspected, and sterilized according to validated manufacturer and healthcare-facility procedures. Bone debris should be thoroughly removed from the cutting surfaces and shaft before sterilization. The Jacobs chuck and associated surgical drill should be maintained separately according to their applicable instructions.
The 3.5mm Drill Bit for Jacobs Drill Chuck provides a practical solution for orthopedic professionals requiring a defined 3.5mm drilling diameter with a compatible chuck-based connection. Its configuration supports controlled bone preparation for selected orthopedic fixation applications when used with the correct surgical instrumentation.
Key Features
- 3.5mm nominal drilling diameter
- Designed for compatible Jacobs drill chucks
- Supports controlled orthopedic bone drilling
- Suitable for selected fracture fixation applications
- Secure chuck-based mounting
- Supports accurate bone preparation
- Compatible drill guide use where required
- Suitable for orthopedic trauma instrumentation
- Controlled manual or powered drilling applications
- Shaft and chuck compatibility should be verified
- Professional surgical instrument configuration
- Reprocessing according to manufacturer instructions
Product Specifications
| Specification | Details |
|---|---|
| Product Name | Drill Bit 3.5mm Jacobs Drill Chuck |
| Instrument Type | Orthopedic Drill Bit |
| Drill Diameter | 3.5mm |
| Chuck Compatibility | Jacobs-style Drill Chuck |
| Primary Function | Bone drilling and preparation |
| Application | Compatible orthopedic fixation procedures |
| Specialty | Orthopedic / Trauma |
| Drive Connection | Jacobs chuck compatible |
| Drill Guide Compatibility | Verify applicable system |
| Overall Length | Refer to manufacturer specification |
| Material | Refer to manufacturer specification |
| Sterilization | Follow validated reprocessing instructions |
| Reusable | Depending on supplied configuration |
| Intended User | Qualified healthcare professionals |
FAQs
1. What is the 3.5mm Drill Bit used for?
It is designed for controlled bone drilling and preparation during compatible orthopedic fixation and reconstructive procedures.
2. What does 3.5mm indicate?
The 3.5mm measurement refers to the nominal diameter of the drill bit’s cutting portion.
3. What is a Jacobs drill chuck?
A Jacobs-style drill chuck is a chuck mechanism designed to securely grip compatible drill bits or shafts during rotational drilling.
4. Can this drill bit be used with any Jacobs chuck?
Not necessarily. The drill-bit shaft must be compatible with the specific Jacobs chuck. Compatibility should be confirmed before use.
5. Can this drill bit be used for fracture fixation?
It may be used for compatible fracture fixation and bone preparation applications when the 3.5mm drill size and surgical system requirements match.
6. Is a drill guide required?
A compatible drill guide or sleeve may be required by certain fixation systems to maintain accurate drilling alignment. Follow the applicable surgical technique.
7. How should the drill bit be maintained?
If reusable, it should be thoroughly cleaned, inspected, and sterilized according to validated manufacturer instructions, with particular attention to the cutting edges and chuck connection.
