-35%
The Drill Bit 2.7mm Quick Coupling End is a precision orthopedic drilling instrument designed for controlled preparation of bone during fracture fixation and other compatible surgical procedures. With a 2.7mm drilling diameter and a quick coupling end, this drill bit is intended to work with compatible surgical handles or drilling systems that use the corresponding connection interface.
Accurate drilling is an important part of orthopedic fixation because the prepared hole must correspond appropriately with the intended fixation component and surgical technique. The 2.7mm diameter makes this drill bit suitable for selected orthopedic instrumentation systems where a 2.7mm drill size is specified. It may be used during bone preparation associated with fracture fixation, trauma surgery, reconstructive procedures, and other applications according to the requirements of the compatible implant or instrument system.
The quick coupling end provides an efficient connection to compatible surgical equipment. This type of interface can help streamline instrument changes during a procedure while maintaining a secure connection between the drill bit and its designated handle or drilling system. Compatibility should always be confirmed before use, as quick coupling interfaces are not universally interchangeable between different manufacturers or instrument systems.
The 2.7mm working diameter provides a defined drilling size for controlled bone preparation. When used with an appropriate drill guide or sleeve, the instrument can support maintenance of the intended drilling trajectory and help improve consistency during preparation. Proper positioning, alignment, drilling speed, pressure, and depth should follow the surgical technique and the instructions associated with the compatible fixation system.
For orthopedic teams, dependable instrument performance is important throughout repeated surgical use. Before each procedure, the drill bit should be inspected for cutting-edge condition, deformation, corrosion, surface damage, and secure connection at the coupling end. A damaged or worn drill bit may affect drilling performance and should be removed from service according to facility procedures.
If supplied as a reusable surgical instrument, the drill bit should be cleaned, inspected, disinfected, sterilized, and stored according to the manufacturer’s validated instructions and the healthcare facility’s instrument-reprocessing protocol. Proper maintenance helps preserve the working surface and connection mechanism while supporting reliable performance over the instrument’s service life.
The 2.7mm Drill Bit with Quick Coupling End is a useful addition to compatible orthopedic drill and fixation instrument sets. Its defined 2.7mm diameter, quick coupling configuration, and focused drilling function make it suitable for professional surgical environments where precise bone preparation is required.
Key Features
- 2.7mm drill bit diameter
- Quick coupling end for compatible systems
- Designed for controlled orthopedic bone drilling
- Supports accurate bone preparation
- Suitable for selected fracture fixation procedures
- Compatible with designated surgical handles or drilling systems
- Can be used with compatible drill guides or sleeves where required
- Supports controlled drilling trajectory
- Useful for orthopedic trauma and reconstructive instrumentation
- Verify connection and system compatibility before use
- Designed for professional surgical environments
- Reprocess according to validated manufacturer instructions
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 2.7mm Drill Bit with Quick Coupling End |
| Instrument Type | Orthopedic Surgical Drill Bit |
| Drill Diameter | 2.7mm |
| Connection | Quick Coupling End |
| Primary Function | Bone Drilling and Preparation |
| Application | Orthopedic Fixation and Bone Preparation |
| Specialty | Orthopedic / Trauma Surgery |
| Compatible Equipment | Compatible quick-coupling surgical system |
| Drill Guide Compatibility | Verify with manufacturer/system |
| Overall Length | Refer to manufacturer specification |
| Shaft Configuration | Refer to manufacturer specification |
| Material | Refer to manufacturer specification |
| Sterilization | Follow validated manufacturer instructions |
| Reusability | Depends on supplied configuration |
| Intended User | Qualified healthcare professionals |
FAQs
What is a 2.7mm Drill Bit used for?
It is designed for controlled bone drilling and preparation in orthopedic procedures where a 2.7mm drill diameter is specified by the compatible surgical fixation system.
What does the 2.7mm size indicate?
The 2.7mm designation refers to the drill bit’s nominal drilling diameter. The appropriate size should be selected according to the surgical technique and compatible fixation system.
What is the purpose of the quick coupling end?
The quick coupling end allows the drill bit to connect with compatible surgical handles or drilling equipment designed for that particular coupling interface.
Can this drill bit be connected to any quick coupling handle?
No. Quick coupling systems are not necessarily universal. The drill bit and handle should have matching, manufacturer-approved connection interfaces.
Can it be used with a drill guide?
Yes, when the drill guide or sleeve is compatible with the 2.7mm drill bit and the applicable surgical system. Proper alignment and compatibility should be confirmed before use.
Is the 2.7mm drill bit suitable for fracture fixation?
It may be used for selected fracture fixation and orthopedic trauma procedures where a 2.7mm drill is specified. The exact application depends on the fixation system and surgical technique.
How should the drill bit be maintained?
If reusable, it should be thoroughly cleaned, inspected, sterilized, and stored according to the manufacturer’s validated reprocessing instructions and facility protocol.
