-27%
The 7″ Pliers Max Open ½” Parallel are precision manual pliers designed for controlled gripping, holding, positioning, and manipulation of compatible surgical materials and components. With a 7-inch overall length, parallel working jaws, and a maximum opening of ½ inch, this instrument provides a useful combination of reach, jaw control, and working clearance for selected orthopedic and surgical applications.
The parallel jaw configuration allows the working surfaces to remain substantially parallel during operation, helping provide consistent contact across the material being handled. This can be beneficial when a stable grip is required for positioning or manipulating small components, wires, pins, or other compatible materials. The ½-inch maximum opening defines the available jaw clearance and should be considered when selecting the instrument for a particular application.
With its 7-inch length, the instrument offers useful reach while remaining manageable in the hand. It may be incorporated into orthopedic, trauma, fixation, or general surgical instrument sets where controlled manual manipulation is required. Specific clinical applications should be determined according to the instrument’s intended use, jaw design, and the manufacturer’s recommendations.
The parallel jaws are particularly suited to tasks where controlled, even contact is preferred over a narrow pointed grip. Depending on the specific configuration, the pliers may assist with holding, positioning, or manipulating compatible fixation materials. They should not be used for cutting unless the instrument is specifically manufactured and designated for cutting.
Proper technique is important when using surgical pliers. Excessive force should be avoided because it can damage the instrument, deform the material being handled, or affect the precision of the working jaws. The ½-inch maximum opening should also not be exceeded, as forcing the jaws beyond their designed range can compromise the instrument’s mechanical performance.
Before clinical use, inspect the working jaws for alignment, surface damage, wear, and smooth operation. The joint and handles should also be checked to ensure proper mechanical function. Instruments with damaged or excessively worn working surfaces should be removed from service according to facility procedures.
For reusable configurations, cleaning, inspection, lubrication where applicable, packaging, and sterilization should follow the manufacturer’s validated instructions and the healthcare facility’s approved reprocessing protocol. Material composition and sterilization compatibility should be confirmed for the specific product supplied.
The 7″ Pliers Max Open ½” Parallel provide controlled parallel-jaw handling and a defined ½-inch maximum opening, making them a practical addition to professional orthopedic and surgical instrument sets.
Key Features
- 7-inch overall instrument length
- Parallel working jaw configuration
- Maximum jaw opening of ½ inch
- Designed for controlled gripping and holding
- Provides stable, consistent jaw contact
- Useful for positioning compatible surgical components
- Suitable for selected orthopedic and trauma applications
- Practical reach with controlled manual handling
- Useful for manipulation of compatible wires and fixation materials
- Maximum opening provides defined working clearance
- Inspect jaw alignment and joint function before use
- Follow manufacturer instructions for cleaning and sterilization
Product Specifications
| Specification | Details |
|---|---|
| Product Name | Parallel Pliers |
| Overall Length | 7 inches |
| Jaw Type | Parallel |
| Maximum Opening | ½ inch |
| Instrument Type | Manual Surgical Pliers |
| Primary Function | Gripping, holding, positioning and manipulation |
| Application | Orthopedic / Surgical |
| Material Compatibility | Compatible surgical materials; verify manufacturer specifications |
| Reusable Status | Configuration dependent |
| Sterilization | Follow manufacturer-approved reprocessing instructions |
FAQs
1. What are 7″ Parallel Pliers used for?
They are designed for controlled gripping, holding, positioning, and manipulation of compatible surgical materials and components.
2. What is the maximum opening of these pliers?
The maximum opening is ½ inch, as specified in the product title.
3. What does the parallel jaw design provide?
Parallel jaws provide a consistent contact surface and can help maintain a stable grip during controlled manipulation.
4. Can these pliers be used for orthopedic procedures?
They can be used for selected orthopedic and trauma applications involving compatible wires, fixation materials, and surgical components.
5. Can these pliers be used for cutting wire?
They should not be used for cutting unless the specific instrument is designed and designated as a cutting instrument.
6. Why is the ½-inch maximum opening important?
It defines the available jaw clearance and helps users select the appropriate instrument for the size of material or component being handled.
7. How should these parallel pliers be maintained?
Inspect the jaws, joint, and handles for alignment, wear, and damage. Reusable versions should be cleaned and sterilized according to validated manufacturer and facility procedures.
