-20%
The 8 1/2″ Impactor 6.5 x 11.5mm Offset is an orthopedic surgical instrument designed for controlled bone handling, positioning, and manual impaction. Its 8 1/2-inch overall length provides useful working reach, while the 6.5 x 11.5mm working dimensions provide a defined contact area for controlled interaction with bone.
The offset configuration provides a specialized working orientation compared with a straight impactor. This design can be selected when the surgical approach requires an offset working profile or a different angle of access to the operative area. The 6.5 x 11.5mm dimensions provide a compact working area that can be selected according to the anatomical and procedural requirements.
This impactor may be incorporated into orthopedic, trauma, reconstructive, and related surgical instrument sets where controlled bone manipulation, positioning, or impaction is required. Its manual design allows the surgical professional to maintain direct control over instrument placement and applied force throughout use.
The 8 1/2-inch length offers a practical balance between reach and handling within the surgical field. The 6.5 x 11.5mm working end provides a defined contact surface, while the offset configuration allows an alternative working orientation when appropriate for the surgical technique. These characteristics make it a useful addition to instrument sets containing multiple impactor sizes and configurations.
The offset profile is particularly relevant when instrument orientation and access are important considerations. Rather than relying on a single straight configuration, surgical teams can select the impactor geometry that corresponds with the requirements of the procedure and working area. Specific clinical use should always be determined by the trained surgical professional.
For reusable surgical instrumentation, thorough cleaning and inspection should be performed after each use. The working end, offset section, shaft, and other accessible surfaces should be cleaned according to the healthcare facility’s validated instrument-processing procedures. Surgical residue, tissue, and blood should be removed before inspection and sterilization.
Before reuse, the impactor should be examined for deformation, surface damage, corrosion, excessive wear, or other defects that could affect its intended function. Particular attention should be given to the working end and offset section to ensure the instrument remains in appropriate condition.
Sterilization should be performed using a validated method compatible with the instrument and in accordance with applicable manufacturer instructions and healthcare facility protocols. Proper cleaning, inspection, sterilization, handling, and storage help maintain the instrument’s working condition over repeated use.
The 8 1/2″ Impactor 6.5 x 11.5mm Offset provides a combination of extended working length, compact contact dimensions, and an offset configuration for professional orthopedic instrumentation. It is designed to support controlled bone manipulation and manual impaction where this specialized working profile is appropriate.
Key Features:
- 8 1/2-inch overall length
- 6.5 x 11.5mm working dimensions
- Offset working configuration
- Designed for controlled bone impaction
- Suitable for bone handling and positioning
- Defined contact area
- Practical surgical reach
- Supports direct manual control
- Suitable for orthopedic and trauma instrument sets
- Useful for reconstructive surgical applications
- Reusable surgical instrument design
- Easy to clean, inspect, and sterilize
Product Specifications:
| Specification | Details |
|---|---|
| Product Name | 8 1/2″ Impactor 6.5 x 11.5mm Offset |
| Instrument Type | Bone Impactor |
| Overall Length | 8 1/2 inches |
| Working Size | 6.5 x 11.5mm |
| Configuration | Offset |
| Primary Function | Bone handling, positioning, and impaction |
| Application | Orthopedic and surgical procedures |
| Specialty | Orthopedic Surgery |
| Operation | Manual |
| Working Profile | Compact, offset |
| Reusable | Yes, subject to proper processing |
| Sterilization | Follow validated facility protocols |
| Construction | Surgical instrument construction |
| Condition | Professional surgical instrument |
FAQs
1. What is the 8 1/2″ Offset Bone Impactor used for?
It is designed for controlled bone handling, positioning, and manual impaction during orthopedic and related surgical procedures.
2. What does 6.5 x 11.5mm refer to?
The 6.5 x 11.5mm measurement refers to the specified dimensions of the instrument’s working area.
3. What does Offset mean in this impactor?
Offset describes the specialized working configuration of the instrument, providing an alternative working orientation compared with a straight impactor.
4. Is this impactor suitable for orthopedic procedures?
Yes. It is designed for inclusion in orthopedic and related surgical instrument sets where controlled bone manipulation or impaction is required.
5. What is the benefit of the 8 1/2-inch length?
The 8 1/2-inch length provides practical working reach while maintaining direct manual handling and control.
6. Can this bone impactor be reused?
Yes, when properly cleaned, inspected, sterilized, and maintained according to validated healthcare facility procedures and applicable manufacturer instructions.
7. How should the Offset Bone Impactor be sterilized?
It should be thoroughly cleaned and inspected before sterilization using a validated process appropriate for the instrument and healthcare facility.
8. What should be inspected before reuse?
The working end, offset section, shaft, and overall instrument should be checked for damage, deformation, corrosion, residue, or excessive wear.