Impactor 10 x 13mm Wide (8 1/2″)

The Impactor 10 x 13mm Wide (8 1/2″) is an orthopedic surgical instrument designed to assist with controlled bone handling, positioning, and manual impaction. With an overall length of 8 1/2 inches and a wide 10 x 13mm working configuration, it provides a practical combination of reach and contact area for use within appropriate surgical procedures.

The wide working profile is suited to situations where a broader contact surface is preferred during bone manipulation or impaction. The 10 x 13mm dimensions identify the specified working size of the instrument and allow surgical professionals to select an appropriate impactor according to the requirements of the procedure and operative area.

Its 8 1/2-inch length provides useful working reach while maintaining direct manual control. The instrument can be incorporated into orthopedic, trauma, reconstructive, and related surgical instrument sets where controlled bone positioning or impaction is required. Exact clinical application should be determined by the trained surgical professional based on the surgical technique and patient requirements.

The wide configuration complements smaller and more narrowly shaped impactors within an orthopedic instrument tray. Selecting an appropriate working surface can help provide controlled contact with the intended area while allowing the operator to maintain accurate instrument positioning. The manual design also allows the applied force and instrument placement to be controlled directly during use.

For reusable surgical instrumentation, proper processing is an important part of maintaining the instrument’s condition. After use, the impactor should be thoroughly cleaned according to the healthcare facility’s validated instrument-processing procedures. Particular attention should be given to the working end and any areas where biological material may collect.

Following cleaning, the instrument should be carefully inspected for visible residue, surface damage, deformation, corrosion, or excessive wear. The 10 x 13mm working area should remain in suitable condition for its intended function. Any instrument showing damage that could affect safe or effective use should be evaluated according to the facility’s instrument-management procedures.

Sterilization should be performed using a validated method compatible with the instrument and consistent with applicable manufacturer instructions and healthcare facility protocols. Appropriate cleaning, inspection, sterilization, handling, and storage practices help support reliable performance and extend the useful service life of reusable surgical instrumentation.

The 8 1/2″ Impactor 10 x 13mm Wide offers a defined, broad working surface combined with an 8 1/2-inch overall length. Its practical geometry makes it a useful option for professional orthopedic instrument sets requiring controlled manual bone handling and impaction.

Key Features:

• 8 1/2-inch overall length
• 10 x 13mm working dimensions
• Wide working configuration
• Designed for controlled bone impaction
• Suitable for bone handling and positioning
• Broad, defined contact area
• Practical working reach
• Direct manual control
• Suitable for orthopedic and trauma instrument sets
• Useful for reconstructive surgical applications
• Reusable surgical instrument design
• Supports routine cleaning, inspection, and sterilization

Product Specifications:

FAQs

1. What is the 8 1/2″ Wide Bone Impactor used for?
It is designed for controlled bone handling, positioning, and manual impaction during orthopedic and related surgical procedures.

2. What does 10 x 13mm indicate?
The 10 x 13mm measurement identifies the specified dimensions of the impactor’s working area.

3. What does Wide mean in this impactor?
Wide describes the working configuration, indicating a broader contact profile compared with narrower impactor designs.

4. Is this impactor suitable for orthopedic surgery?
Yes. It is designed for use within orthopedic and related surgical instrument sets where controlled bone manipulation or impaction is required.

5. What is the advantage of the 8 1/2-inch length?
The 8 1/2-inch overall length provides practical reach while allowing direct manual handling and positioning.

6. Can this impactor be reused?
Yes, when properly cleaned, inspected, sterilized, and maintained according to validated healthcare facility procedures and applicable manufacturer instructions.

7. How should the impactor be sterilized?
It should be cleaned and inspected thoroughly before sterilization using a validated process appropriate for the instrument.

8. What should be checked before reuse?
Inspect the working surface and overall instrument for residue, deformation, corrosion, damage, or excessive wear before reuse.